Illustrator (Desktop) Feature Requests
When entering a new feature request, please provide:
- Description
- Why is this valuable to you?
- or
No existing idea results
- ~ No ideas found ~
4699 results found
-
Save for Web
The new and NOT IMPROVED Illustrator does not allow me to save gifs and jpegs for the web. I used this feature all time since I design web banners - and now it's gone! Thanks for nothing, Adobe!
2 votesHi,
This option is available under File > Export > Save For Web (Legacy). If you still don’t find the option or any other issue please let us know.
Thanks & Regards
Nitish Agarwal
Illustrator Team -
Disabling Keep Selected option for Pencil tool should not deselect path that is edited
A detail that I'm missing from the legacy Pencil tool.
It’s a missing detail in the option keep to path selected or deselected after being drawn.
When this option is unchecked the object is deselected.
If the path is selected again to be drawn upon to adjust the shape. It deselects it again.
Now that's all logical and according to what the option says its supposed to do.BUT
The legacy Pencil tool before its rewrite it worked almost like that but not quite the same, and it was great.
So you had the option to have the path deseletced after drawing.
BUT if you den reselected it it stayed selected for as long as you needed it to adjust the shape.So to be clear I'm gonna try to describe the process
Draw shape.
Shape drawn, not selected.
Select the drawn shape to draw on it to adjust it, its selected, you draw on on it, it still stays selected.This was very useful. Because usually you just want it deselected on first draw, but sometimes you need to go in and adjust a particular shape and then you're in the mode of massaging that shape and want it selected till you're done.
Please try the old pencil tool out and you will understand what i mean.
Please implement this again.Basically that the shape only deselect upon first draw. If reselected again it stays selected till you decide when to deselect it.
It worked like this for 20 years or however long the the pencil too has been around.A detail that I'm missing from the legacy Pencil tool.
It’s a missing detail in the option keep to path selected or deselected after being drawn.
When this option is unchecked the object is deselected.
If the path is selected again to be drawn upon to adjust the shape. It deselects it again.
Now that's all logical and according to what the option says its supposed to do.BUT
The legacy Pencil tool before its rewrite it worked almost like that but not quite the same, and it was great.
So you had the option to have the path deseletced after…
2 votes -
Angled Guidelines
I'm working on a typography piece right now and my guidelines look like this (see attached.) The black lines are straight strokes. I think it would be really neat to have an option for angled guidelines, so I don't have to mix vertical/horizontal guides with strokes.
2 votesIllustrator allows to turn any path into a guide with View > Guides > Make Guides command (and the opposite as well).
Also it’s possible to rotate guides, using Rotate tool and Rotate dialog.
-
Take that light bulb icon that accesses tutorials and push it further...
Take your tutorial access feature and push it further, make it a customizable recipe resource, not unlike a cookbook.
• Enable users to save (links to) tutorials relevant to their specific interests AND allow them to bookmark.
• This idea fits well with all your apps.
• Explore some ways to encourage users to post accessible tutorials on Adobe Cloud, formatted for this function. That would stimulate your apps community greatly. Example: Zbrush
Ps. The new properties feature is awesome. Thank you!2 votes -
Microsoft Visual C++ Runtime Library
I am new to CC 2017 however I am getting a very annoying error message each time I open the CC up.
The heading is: Assertion Failed!
I have attached a screen grab for your attention.
Look forward to hearing from you!2 votes -
Pattern making
I want a feature in the pattern making panel. When I make a pattern I often duplicate a graphic and change something, maybe color, in the area where you make the graphics that shall be repeated. After duplicated I move it to the place where it is repeated. Then I can change color of one of the graphics for example, and these both graphics are now repeated. The problems is that when I move the graphic I kind of eyeball the placement of it. I would want to be more exact and quicker with it. I don't know what one would call it if one could make this automattic, "place the new graphic in the repeat"? And this should be possible to do if I have a bigger scene with more graphics that I want to duplicate. For example I may have a little scene and I want to duplicate it one step up and then both these to the right, then I have it duplicated four times. So it would be great if you could for example mark by covering up a grid how you want it duplicated. For example you could mark two rows in width and three rows in height to get it duplicated like that six times. Then I would get it exact, and it would be easy to get in and make some changes in it, in that new "tile".
I want a feature in the pattern making panel. When I make a pattern I often duplicate a graphic and change something, maybe color, in the area where you make the graphics that shall be repeated. After duplicated I move it to the place where it is repeated. Then I can change color of one of the graphics for example, and these both graphics are now repeated. The problems is that when I move the graphic I kind of eyeball the placement of it. I would want to be more exact and quicker with it. I don't know what one…
2 votes -
Highlighted cursor markers on rulers
I would love to see an option to enable a highlighted cursor marker on the ruler. To explain what I mean by cursor marker, I mean the small, light gray line that follows where your cursor is along the x and y ruler. This light gray line is very hard to distinguish its exact position against the background ruler markers, since there is literally no contrast between them. I would love to see an option to change it to any of the system swatches.
2 votes -
Distribute in patterns
I want the pattern to be able to connect more to the resulting repeat. With that I mean for example this.
1) If I draw a line freehand, from left to right. Then I would like to be able to make a seamless repeat of that line. So at the right I can "connect" to the left end and join/smooth it together
2) If I want 4 similar/identical things spaced evenly and repeated. Then I can distribute the group to space it evenly. But on the left and right side (or top/bottom) how do this spacing between the items gets the same as the spacing to the next repeat on the ends? I would like to distribute, not only between the objects within my tile, but also that I get the same distance to the next tile when repeated. To do this it must be some connection to the resulting pattern.
These are just a few examples around this.I want the pattern to be able to connect more to the resulting repeat. With that I mean for example this.
1) If I draw a line freehand, from left to right. Then I would like to be able to make a seamless repeat of that line. So at the right I can "connect" to the left end and join/smooth it together
2) If I want 4 similar/identical things spaced evenly and repeated. Then I can distribute the group to space it evenly. But on the left and right side (or top/bottom) how do this spacing between the items gets…2 votes -
Allow to assign a keyboard shortcut to change Constrain angle in Preferences
I would like to see access to Doc prefs via shortcuts / actions. So for example when I press F3 it changes Constrain Angle to 30 degrees. Currently use a keyboard macro made for this but it’s not very good. In general if we could access more things via shortcuts and actions it would make work flows more efficient.
2 votes -
adapt default imperial/metric units to geolocation, or remember previous settings
This relates to the procedure of creating a new document, so that there shouldn't be a need for changing system every time, to comprehend the dimensions of a document in usual units.
2 votes -
No strokes on linked files
Illustrator CC 2017 (up to date) Windows 64bit
Place a linked file, eg. a jpg
Add a stroke to the linked file object in the appearance panel
Try and change the stroke weight.
Expected a stroke. like any other.2 votesTo have strokes around your linked images, you should do some additional steps:
1. Apply a stroke (obviously)
2. Open Appearance panel
3. Focus the applied stroke attribute
4. Apply Path > Outline Object effect
It should be placed 'inside' of the stroke attribute, not the object itself. You can always drag-n-drop it if you missed.
Why does it work?
The image does not have a path for a stroke to be applied to. If you aplly the effect to the image directly, its pixel data is replaced by a path around the bounding box. Applied to stroke, it give it 'rails' to be stroked along.
Not easy to grasp, but once you get it, Appearance panel becomes your best friend.
-
Scatter Brush 'scatter magnitude' slider
I would like to see a new pair of sliders in the scatter brush options that controls how 'powerful' the scatter is.
Each instance of the brush image would have its distance from the central path, as defined by the 'scatter' slider(s), multiplied by this value. So if it was at 0%, any effect of the scatter sliders would be completely nullified, if it was at 1000%, the effect of the scatter sliders would be multiplied by ten.
Essentially, I would like to be able to control how 'wide' a scatter brush is based on my stylus pressure. The existing 'scatter' control just directly maps light pressure to the value of the left slider and full pressure to the one on the right, which results in the brush art being deposited in a line that wiggles around the path. Which is rarely what I want.
More broadly it would probably be nice to be able to make a scatter brush’s size, spacing, and rotation vary with stylus pressure/tilt/bearing/whatever. Scatter is just the setting I most keenly feel the lack of this with.
I would like to see a new pair of sliders in the scatter brush options that controls how 'powerful' the scatter is.
Each instance of the brush image would have its distance from the central path, as defined by the 'scatter' slider(s), multiplied by this value. So if it was at 0%, any effect of the scatter sliders would be completely nullified, if it was at 1000%, the effect of the scatter sliders would be multiplied by ten.
Essentially, I would like to be able to control how 'wide' a scatter brush is based on my stylus pressure. The existing…
2 votes -
"Check Spelling" Back or Undo Last Button
Add a back button or Undo Last button in the "Check Spelling" dialog box. Many times I accidentally skip a word that needs correction and I have to restart "Check Spelling" from the beginning.
Other times I accidentally pick the wrong correction and have to quit "Check Spelling" undo the fix and restart the process all over again.
Thanks!
2 votes -
auto arrange artboards on new
First, the workspace is Too **** small at this point, especially when working in pixels. And someone out there assumes 72dpi still. Stop it!
I'm creating 4K artboards to explore some ideas. I create 2 of them. And it won't let me create a 3rd without rearranging. Who's idea was That!?!?
The first thing you should do is just move the stinkin' workspace. What's with all the room on the left? Look, if you only work left to right, why are you always trying to center the artboards in the workspace? You'll never use the space above or to the left? Come on people, this isn't rocket science. Just figure out how much space you'd like as a buffer (user selected please) and start the first artboard in near the upper left.
And once you start creating artboards, if you just leave things as the default , once you've got your 4 artboards that fit horizontally (because that's as many 4k boards that you can fit in the workspace) then when I create another one, automatically drop it below artboard1. Don't tell me to rearrange. And I'd actually like a buffer all the way around my artboards, because I may have some items that fall off the artboard. So I may only want to allow 3 artboards wide, and drop the next ones.
Artboards aren't Just for pages. Some of us use them so we can see design exploration all in one document. The useability here sucks.
If some software engineer sees this, they shouldn't even be waiting for votes. It's clearly an oversight and it should be fixed. Do the right thing. Just fix it.
First, the workspace is Too **** small at this point, especially when working in pixels. And someone out there assumes 72dpi still. Stop it!
I'm creating 4K artboards to explore some ideas. I create 2 of them. And it won't let me create a 3rd without rearranging. Who's idea was That!?!?
The first thing you should do is just move the stinkin' workspace. What's with all the room on the left? Look, if you only work left to right, why are you always trying to center the artboards in the workspace? You'll never use the space above or to the…
2 votesHi,
We are pleased to inform you that your request is available in the latest release of Illustrator version 22.0.
Visit your Adobe Creative Cloud Application and update. If you do not see an update on the application please check for update from the flyout options on the application after clicking on three vertical dots. For step by step process please visit: https://helpx.adobe.com/in/creative-cloud/help/download-install-app.html#CheckforupdatesWarm Regards,
Ashutosh Chaturvedi | Sr. Quality Engineering Manager – Illustrator
Adobe. Make It an Experience. -
Could there be a more logical place for show center and path direction than the Attributes panel
The Attributes panel seems like the junk drawer of panels. Wouldn't the show center check box seem more at home in the transform panel, and the path direction seem better suited for stroke or pathfinder panel. Just one less panel taking up space on the artboard.
2 votes -
Circle-tool — subdivision functionality with arrow keys
As the "Effect > Stylize > Round Edges..." is a little bit flawed if working with short sections and third-party-scripts often show the same problem that short sections rounded often are not a circular section but some weird hyberbole of sorts I often use Circles and subdivisions of those as a stand-in if I need a round corner with a fixed radius. Up to now i have to manually draw a line from the center, rotate it by the angle I want and subdivide it with the knife.
If circles could behave a bit like the polygon tool and its arrow-key functionality to add more or less anchorpoints that make up the circle instead of the default 4 that would be awesome.As the "Effect > Stylize > Round Edges..." is a little bit flawed if working with short sections and third-party-scripts often show the same problem that short sections rounded often are not a circular section but some weird hyberbole of sorts I often use Circles and subdivisions of those as a stand-in if I need a round corner with a fixed radius. Up to now i have to manually draw a line from the center, rotate it by the angle I want and subdivide it with the knife.
If circles could behave a bit like the polygon tool and its…2 votes -
Lithological Swatches
When I want to use the USGS lithological swatches, I usually have difficulty finding them. Could all these be placed in a top level menu?
2 votes -
Enable the ablility to keep swatch catagories in my tool panel.
I would love to keep tool swatches in my tool panel. I do have the ability to take one and put it off to the side among my tools, but when I restart Illustrator the tab is gone leaving me to conclude this is not a supported feature. I use one particular swatch category a lot and this would save me time.
2 votes -
Assets panel multiple selection with just mouse
I want to use mouse and "Ctrl" to select assets I want to export in Asset Export panel, with a frame / marquee. But I can't do that. Mouse works only as per 1 selection. Yes, I can hold "Ctrl" and click on different assets or use Shift to select some, but that not useful for me. Sometimes I want to select big groups of assets located at the beginning and end of the assets list, so I just want to hold "Ctrl" and play with mouse easily and fast by selecting any items.
It's like you just holding "Ctrl" and selecting folder with mouse in Finder. So easy and cool. Please add this option!I want to use mouse and "Ctrl" to select assets I want to export in Asset Export panel, with a frame / marquee. But I can't do that. Mouse works only as per 1 selection. Yes, I can hold "Ctrl" and click on different assets or use Shift to select some, but that not useful for me. Sometimes I want to select big groups of assets located at the beginning and end of the assets list, so I just want to hold "Ctrl" and play with mouse easily and fast by selecting any items.
It's like you just holding "Ctrl"…2 votes -
Show slices names
I'm looking for a simple but very useful option for slices:
"Show slice name"Currently in setting of Illustrator there are only option:
"Show slice numbers", - file attached.
But it's doesn't give me anything actually.
I've created names for each slice and I need to check these names visually, without need to select each slice and goto it slice settings..2 votes
- Don't see your idea?