4679 results found

1. Try to Eliminate Modal Dialogs

   There are entirely too many Modal dialog boxes in Illustrator. It would be nice if there were none. Everything that currently pops up and steals focus (completely obscuring everything behind it) should be done in a "settings panel" that can be opened or closed as necessary.

   For example, there is nothing so urgent about the line tool that it should require a modal dialog box to open. If I want to configure the settings, they should appear in a panel called "settings" and I should be able to change them easily without having to stop everything, fill out the form, press apply just to come back and do it again in a minute or two.

   Realistically, 99% of the modal dialogs Illustrator currently uses are not needed if you just had a Settings Panel that provided access to the tool settings dynamically without stopping your work.

   There are entirely too many Modal dialog boxes in Illustrator. It would be nice if there were none. Everything that currently pops up and steals focus (completely obscuring everything behind it) should be done in a "settings panel" that can be opened or closed as necessary.

   For example, there is nothing so urgent about the line tool that it should require a modal dialog box to open. If I want to configure the settings, they should appear in a panel called "settings" and I should be able to change them easily without having to stop everything, fill out the form,… more

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Show Smart guides when using Curvature Tool

   When using the curvature tool to creat a symmetric curve, it would be nice when smart guides (to the center) are shown.

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Snapping  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Done (Available in Beta)  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

   It seems to work in the latest Beta 29.5.0.15, the Curvature Tool now respects Smart Guides. The position quantization for new points is still there, and these two snaps seem to fight, but it is usable finally. Please test it and provide some feedback.

3. Please make TABS easier to use.

   Please make TABS easier to use. It's so fiddly trying to get the bottom arrow to pull across for indented bullet list alignment.

   •  

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Make an optional Shapes dialogue that works like Figma

   https://www.youtube.com/watch?v=YGBIc6oJCos

   I am in love with these features and could see having an "Advanced Option" set to turn on features like this for quick non-destructive design output.

   Thank you! :)

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Tools  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Resize all artboards independently and by percentage with preview

   Resize all artboards and all artwork on boards at the same time by a percentage (currently feature is artboard only and by pixels only, unless I am missing some checkboxes somewhere?) -- each artboard would be independent. Like the same shape feature when selecting artwork and choosing Transform > Transform Each -- but for artboards. Would love a preview before committing!

   •  

   •  

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Documents and Artboards  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. 「ビューを回転」で0°にスナップして欲しい

   カンバスビューを回転出来るようになりましたが、リセットの操作をしなくても、回転させているときに0°に近くなったら0°にスナップする機能が欲しいです。
   今は+-5°くらいでスナップしますが、このスナップはあまり必要ありません。

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Make the corner widgets automatically disappear in small objects

   Sometimes when I'm editing small shapes, I accidentally click and drag the corner widgets and end up rounding the object's edges instead of transforming their size. I believe that when it comes to small objects it doesn't make sense to have the corner widget visible as it is not possible to have precision in the rounding of the edges, so it would make sense to make it disappear automatically. This could be related with zoom levels, so when I zoom in that small object, the widgets reappear.

   I know that it is possible to disable them, but they are quite useful, but sometimes they get in the way of transforming objects and it's really annoying.

   Sometimes when I'm editing small shapes, I accidentally click and drag the corner widgets and end up rounding the object's edges instead of transforming their size. I believe that when it comes to small objects it doesn't make sense to have the corner widget visible as it is not possible to have precision in the rounding of the edges, so it would make sense to make it disappear automatically. This could be related with zoom levels, so when I zoom in that small object, the widgets reappear.

   I know that it is possible to disable them, but they are quite… more

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   4 comments  ·  Performance, Enhancements  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Default stroke check box next to stroke weight

   Please, please make a "Default" checkbox next to the stroke weight that can force all future strokes to the set weight when checked

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Strokes  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Please return the option to export .dxfs in R13/LT95 version

   Please return the option to export .dxfs in R13/LT95 version. This was removed in the 2021 versions of Illustrator and some users need this export option as it is critical in the design and workflow for people who vut and etch with cnc lasers.

   See this forum post please:

   https://community.adobe.com/t5/illustrator/why-can-i-not-export-to-autocad-version-r13-lt95-anymore/m-p/12102215#M278748

   4 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Double clicking a Gradient Fill should open the Gradient Editor

    Double clicking a Gradient Fill should open the Gradient Editor instead of the plain color picker.

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  User Interface  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Allow to set a color for a gradient stop using Color Picker

    Picking colors or changing colors in Illustrator has always been a pain compared to Photoshop and I'm not sure why. When I want to choose a color for a gradient or in the color panel in general, why can I not open the color picker and move the slider around on the big square to actively change colors and see the colors change in real time? This frustration often makes me want to switch from using Adobe products.

    •  

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Colors, Swatches, Patterns  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. 日本語での作業時にフォントの選択が困難を極めます。

    日本語版を使用しているとフォントの数が極端に多くなります。モリサワ、フォントワークスなどがサブスクリプションで多数の書体が使えるようになっており、そのうえフォントの名前が頭にA-OTFなどのベンダーのつけた記号によって、記憶しているフォント名順にならず、さらに欧文フォントが多数インストールされており、とどめにAdobeTypeが加わり、フォントの並び順がめちゃくちゃでかつスクロールも以上に長く、使いたいフォントにすぐたどり着けません。最近使用したフォントをフォントメニューの頭に並ぶ設定にすると、こんどは実際に書類のフォントを変えながら探すときに、毎回フォントメニューの頭に戻ってしまい、たとえば欧文でAの名前から順に探すために毎回ながいスクロールをするハメになります。また、ラップトップの小さい画面で選べるようにポップアップしたフォントメニューの天地幅が狭く、大型モニタで作業する多くのユーザーは少しの範囲しかないポップアップで延々スクロールしなければなりません。提案は3点。　1｜フォントのポップアップの天地幅を大きなモニタで長くして欲しい。　2｜フォントメニューのフォント名の並び順を任意に変えられるようにして欲しい。　3｜微妙に違うフォントが増えたので、フォント名の右側だけではなく、固定ウインドウにもっと大きなサンプルを表示して欲しい。以上です。英語版以外の特に日本語版のフォント選択の不便さは誰もが困っているはずです。非能率このうえない状態をユーザにいつまで強いるのでしょうか。改善を強く望みます。

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. REMOVE THE FRUSTRATING LIGHT BULB "LEARN" FEATURE BEFORE I CANCEL MY SUBSCRIPTION!

    I would curse here normally but I am trying to refrain, I have taken 10 minutes from my day today to see if this irritating feature that I have never used and even as a newcomer would never use either can be disabled as it infuriates me.

    User experience research was not undertaken with this feature clearly as many of the community have voiced their frustrations with this exact feature.

    REMOVE IT PLEASE, else I will look at cancelling the subscription just due to this, that's how irritating this pointless feature is, and this is not the first time Adobe has shoehorned something into the expensive toolset that has been a hindrance to us being more productive, instead it's doing the exact opposite.

    I would curse here normally but I am trying to refrain, I have taken 10 minutes from my day today to see if this irritating feature that I have never used and even as a newcomer would never use either can be disabled as it infuriates me.

    User experience research was not undertaken with this feature clearly as many of the community have voiced their frustrations with this exact feature.

    REMOVE IT PLEASE, else I will look at cancelling the subscription just due to this, that's how irritating this pointless feature is, and this is not the first time Adobe… more

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  User Interface  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. Adjust Artboard to image

    When opening a pixel image in Ai (to add vector details), Ai does not set the Artboard size to the boundaries of the image. Would be nice when it does.

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. Add more Live Shape Presets

    Please add shape presets for common shapes such as donuts, pies, tear-shapes, double stars (stars with two different lengths of points), square stars, cloud shapes, trapezoids, double arrows, cogs, and crescents. This would streamline the process of creating flat vector icons if there were shape presets for these common shapes. The idea would be to add adjustable anchor points to preset versions of the shapes mentioned above that the user could adjust in the menu or control panel. For example, for the cloud shape, the two parameters could be the number of bubbles & the inner radius(the radius of the valleys between bubbles as a percentage of the radius of the maximum radius)).
    This is valuable to me because I use this shapes a lot in my vector drawing/artwork.

    Please add shape presets for common shapes such as donuts, pies, tear-shapes, double stars (stars with two different lengths of points), square stars, cloud shapes, trapezoids, double arrows, cogs, and crescents. This would streamline the process of creating flat vector icons if there were shape presets for these common shapes. The idea would be to add adjustable anchor points to preset versions of the shapes mentioned above that the user could adjust in the menu or control panel. For example, for the cloud shape, the two parameters could be the number of bubbles & the inner radius(the radius of the… more

    • 

    •  

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    4 comments  ·  Tools  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Done (Available in Beta)  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

    You can now try the Star as a Live Shape in the latest Beta 28.3.0.47

    Please test it and share your feedback on the tool.

16. Adding Scale next to Units in Preferences

    I would like to be able to work with scales. For example sometimes I design large objects that don't fit the working area and using scales would be much easier to have a real idea of the dimensions of the object. I would like to be able to choose scales 1:5, 1:25, 1:50 and see the scaled dimension in "Properties/Transform" .

    •  

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Documents and Artboards  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Improve Blob Brush

    Hi, I use very often the Blob Brush tool, I think it could be a real plus to make more with it. First, to add constraint between 2 points of click . Two, make more steps between precise and rounded in the option panel. and Three make the same thing for the eraser too, because it seems to be the same as the blob brush but in negative. Is it technically possible?

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Brushes  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. Export for screens: poor JPG compression and custom JPG settings

    The compression and quality when "exporting for screens" in JPG is really bad compared to "Export for web".

    • You cannot customize the quality of the JPG
    • It embeds the color profile in the file, even if you have selected not to do so.

    •  

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Please make default character styles accessible by all new illustrator documents and easy to manage and edit.

    Please make it much, much easier to cause Illustrator to default to a common set of character and paragraph styles. Having to go into a hidden user folder to modify print.ai is an insult. In the styles menu, please include a "save to common styles". I have thousands of lines of code that automate adobe illustrator, and every time the software is updated everything comes crashing down. Having a shared, common repository of character styles that are available in every document should be simple and easy to manage.

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Please add support for AMD Radeon Pro 5700

    I have a new iMac 27" 2020 and just learned, to my disappointment, that my graphics card is not supported. I have an AMD Radeon Pro 5700, I think the standard for the new iMac is a Radeon Pro 5500 XT (which is also not supported).
    This causes Illustrator to crash at least once or twice a day with a GPU Error report and it then automatically deactivates GPU Performance, which makes Illustrator super slow and laggy.
    I know the iMac 2020 is very new, but since more people will be getting it over time it seems reasonable to support those graphic cards.
    Thanks.

    I have a new iMac 27" 2020 and just learned, to my disappointment, that my graphics card is not supported. I have an AMD Radeon Pro 5700, I think the standard for the new iMac is a Radeon Pro 5500 XT (which is also not supported).
    This causes Illustrator to crash at least once or twice a day with a GPU Error report and it then automatically deactivates GPU Performance, which makes Illustrator super slow and laggy.
    I know the iMac 2020 is very new, but since more people will be getting it over time it seems reasonable to support… more

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Performance, Enhancements  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating