Illustrator (Desktop) Feature Requests
When entering a new feature request, please provide:
- Description
- Why is this valuable to you?
- or
No existing idea results
- ~ No ideas found ~
4728 results found
-
Add Round Butt cap option for strokes
The original idea by Johan Perjus, from https://medium.com/design-bootcamp/things-i-wish-adobe-would-address-with-adobe-illustrator-4796a89e1bae
There are quite a few cases where I use rounded strokes as a starting point for building shapes and where this option would be useful, as in order to know the correct outer dimensions of a stroke, one has to deduct the stroke with from the end caps.
3 votes -
Restore a way to copy the value from another filed with a click on the input’s caption in dialogs
Please bring back the one-click way to duplicate a value from one input field into another for dialogs.
This was available from version 8 through CS5.
Make it a toggle in Preferences.For example, if i wanted to make a square 100mm x 100mm I would select the rectangle tool (M) and then click once in the work area... the dialogue box would come up... I would then only have to enter 100mm into the Width,
then click on the Height descriptor (not the white entry portion) and my dimension would be automatically duplicated in the entry portion of the height dimension.Please bring back the one-click way to duplicate a value from one input field into another for dialogs.
This was available from version 8 through CS5.
Make it a toggle in Preferences.For example, if i wanted to make a square 100mm x 100mm I would select the rectangle tool (M) and then click once in the work area... the dialogue box would come up... I would then only have to enter 100mm into the Width,
then click on the Height descriptor (not the white entry portion) and my dimension would be automatically duplicated in the entry portion of the…3 votes -
Automatically describe sizes in units in file names when exporting
I dream of having many working areas of different sizes, and exporting them to JPG or whatever as separate working areas, that the file name would automatically include the file size depending on the size set in the working file, for example in cm, mm, px... i.e. when I export many areas, in addition to the numbering, they have the current size given in the file name
3 votes -
Allow to set a linear guide by 2 points and an arc guide by 3 points
I would like to suggest the addition of 2-point guides, the ability to rotate guides, and 3-point guides for circular guides. This would allow for dynamic guides that can be adapted to any type of design.
3 votes -
Make custom layers outside of artboards visible in Trim View
Sometimes when using Trim view I do want to see other items shown. Like Notes or measurements that are outside of the artboard, But I still want the preview of Trim View to hide bleed and artwork that extends beyond. I wish that inside the layer Options Settings. there was a checkbox to show in Trim View, so items on that layer are still visible when trim view is active
3 votes -
Rename updated Move locked and hidden artwork with artboard
CC 2025 v29.0 introduces the long-awaited "Scale Artwork with Artboard" option.
The checkbox in Preferences > Selection and Anchor Display > Move Locked and Hidden Artwork with Artboard now also affects whether locked or hidden objects are scaled with the artboard or not.
I didn't realize this right away. When I tried to scale an artboard with a locked object, I got a warning and thought that the new feature just doesn't know how to scale such objects with an artboard. Only then did I realize that the existing option in the settings affects the function.
Perhaps the naming of the option should be made clearer: Preferences > Selection and Anchor Display > Move or Scale Locked and Hidden Artwork with Artboard
CC 2025 v29.0 introduces the long-awaited "Scale Artwork with Artboard" option.
The checkbox in Preferences > Selection and Anchor Display > Move Locked and Hidden Artwork with Artboard now also affects whether locked or hidden objects are scaled with the artboard or not.
I didn't realize this right away. When I tried to scale an artboard with a locked object, I got a warning and thought that the new feature just doesn't know how to scale such objects with an artboard. Only then did I realize that the existing option in the settings affects the function.
Perhaps the naming of…
3 votes -
Copy layer from one document to another with effects / appearance
Wouldn't it be nice to be able to copy-paste a layer from one file to another, including the layer’s effects / appearance?
Or to have an option to Duplicate a Layer into another file (like in Photoshop).
3 votes -
Allow to hold Shift to force Aligned (orthogonal) Dimensions
Ai now tries to smartly detect a relative position of the cursor to a dimension being created and choose if it should be parallel or oblique.
This sound like a smart solution, but in practice is SUCKS.
Take a look at this small GIF.
1. The dimension between two objects is live, and responds to the object being moved up and down fine
2. But if I choose to move it to the right, it says 'hey, I am a dimension between two points, I’m switching to be slanted'
3. OK, I delete it and try to create anew. STRUGGLING, because the space is tight, and if I move the mouse too much, it thinks I try to create a horizontal one. Finally I am able to catch the sweet (sour) spot, and caaaarefully move it back holding my breath.
4. Now it’s an orthogonal (aligned) dimension and I can realign my object back or move without a risk of loosing the status.But we can’t covert 'manual' dimensions into 'aligned' one!
We can’t hold Shift to FORCE it to be aligned!
WTF?!Ai now tries to smartly detect a relative position of the cursor to a dimension being created and choose if it should be parallel or oblique.
This sound like a smart solution, but in practice is SUCKS.
Take a look at this small GIF.
1. The dimension between two objects is live, and responds to the object being moved up and down fine
2. But if I choose to move it to the right, it says 'hey, I am a dimension between two points, I’m switching to be slanted'
3. OK, I delete it and try to create anew. STRUGGLING,…3 votes -
Add Cmd/Ctrl+Shift+X as a text modal keyboard shortcut for strikethrough text
Recently Ai finally added hotkeys slots for text formatting (following this request: http://illustrator.uservoice.com/forums/333657/suggestions/33679330) — for bold, Underline, Italics.
We need more.
Even though Strikethrough (as well as Underline) in Ai is very basic and does not allow customization (here is a request about both: http://illustrator.uservoice.com/forums/333657/suggestions/48103976), we need at least an empty hotkey slot for it. Most apps support Cmd/Ctrl+Shift+X for this, so I suggest the same combination.3 votes -
Dimensions layer should stay locked
Since you decided to force the creation of a specialized Dimensions layer on us when a dimensions is created (and here is a feature request to make this optional: http://illustrator.uservoice.com/forums/333657/suggestions/48236954), we now have a problem with accidental creation of art directly in this dedicated layer, since every time a dimension is selected, this layer gets active and unlocked (reported here: http://illustrator.uservoice.com/forums/939477/suggestions/47570813)
Since you probably don’t really care, and won’t solve both issues, perhaps you should keep this layer locked and not unlock until we choose to.
Perhaps you should make the Dimension tool lock-agnostic then, and allow it to edit and created dimensions in this locked layer (which will prevent every other tool accessing it).Do something already.
Since you decided to force the creation of a specialized Dimensions layer on us when a dimensions is created (and here is a feature request to make this optional: http://illustrator.uservoice.com/forums/333657/suggestions/48236954), we now have a problem with accidental creation of art directly in this dedicated layer, since every time a dimension is selected, this layer gets active and unlocked (reported here: http://illustrator.uservoice.com/forums/939477/suggestions/47570813)
Since you probably don’t really care, and won’t solve both issues, perhaps you should keep this layer locked and not unlock until we choose to.
Perhaps you should make the Dimension tool lock-agnostic then, and allow it…3 votes -
Allow Live Paint selection to have complex appearance
Using Live Paint Selection Tool, we can choose sections of the Live Paint objects, areas and segments of contours, assigning fills and color to them.
But what we can assign is rather basic (the same as for live characters, and the related request about the same deal is here: http://illustrator.uservoice.com/forums/333657/suggestions/46545787)
We can’t assign a brush, change order of appearance attributes, add a second fill and offset it, assign any effect to it, distort or roughen — only fill under stroke, no stroke alignment (even though the panel lies it can be done), no arrowheads... at least dash count as basic apperance.We need more control over it. We need to be able to control appearance for Lve Paint selections fully.
Using Live Paint Selection Tool, we can choose sections of the Live Paint objects, areas and segments of contours, assigning fills and color to them.
But what we can assign is rather basic (the same as for live characters, and the related request about the same deal is here: http://illustrator.uservoice.com/forums/333657/suggestions/46545787)
We can’t assign a brush, change order of appearance attributes, add a second fill and offset it, assign any effect to it, distort or roughen — only fill under stroke, no stroke alignment (even though the panel lies it can be done), no arrowheads... at least dash count as…3 votes -
The Flip buttons in the Properties panel should copy objects
In the Transform section of the Properties panel there are Flip vertical and Flip horizontal buttons.
When holding down Alt while pressing the buttons it would be convenient if they could copy the object, like InDesign does.
3 votes -
Allow to change Line Weights for Dimension and Extension Line with one value
Add a lock option for Dimension tool to change Line Weights for both Dimension and Extension Line at the same time with one value
.希望增加“尺寸线”和“延伸线”可以同时调整粗细选项。
3 votes -
Setting scale dimensions for each layer
Currently, each layer can only be drawn at a scale of 1:1. If it becomes possible to set the scale for each layer, it will be possible to use it in the architectural field. Please consider this.
3 votes -
Artboard instant activation by mouse hover
Currently you to have select the artboard first by left click inside the area, inorder to apply certain operations.
Can there be a toggle option to auto select or activate an artboard whenever mouse hover it? we don't need to click every time to make it active. It saves loads of clicks if you have a complex project with multiple artboards.3 votes -
Make 3D and Materials effect work with raster images
3D and Materials effect doesn't work with raster images. It gives me a strange unrelated message (see attached) when I try. I use Classic 3D, it works, but unfortunately Classic 3D is not really precise and sometimes gives strange results, but better than nothing.
3 votes -
Rename Symbol via context menu
I expect the rename possibiilty in the context menu rather than having to select the symbol and then go to the hamburger menu.
3 votes -
Font stack (like CSS)
As a user who frequently works with CJK texts, I often encounter challenges in managing fonts for multilingual documents. Currently, setting different fonts for mixed-texts is a cumbersome process.
When I work with mixed texts, it is common to set CJK texts in one typeface and English text in another, as it is usually the case for many brands. To do so, I have to set the fonts of the text twice (first English, then find all characters whose font is unchanged and set them to the CJK font). Sometimes, if the chosen CJK font has missing characters (“tofu”), I will have to set them to another CJK font that has the characters. In some cases, I have several fonts lined up, from one closest in style to one with the most comprehensive glyph set. As a result, I find myself often having to go over each text object to make sure the right font is used at the right places.
I propose a feature that allows users to define a prioritized list of fonts. When a character is missing in the first font, the next font on the list is automatically used, similar to the font-family mechanism in Cascading Style Sheets (CSS).
As a user who frequently works with CJK texts, I often encounter challenges in managing fonts for multilingual documents. Currently, setting different fonts for mixed-texts is a cumbersome process.
When I work with mixed texts, it is common to set CJK texts in one typeface and English text in another, as it is usually the case for many brands. To do so, I have to set the fonts of the text twice (first English, then find all characters whose font is unchanged and set them to the CJK font). Sometimes, if the chosen CJK font has missing characters (“tofu”), I…
3 votes -
Paint an Image Map for Defining Complexity in Image Trace Function
Feature Request: Paint an Image Map for Defining Complexity in Image Trace Function
Description:
I would like to request a feature enhancement for Adobe Illustrator's Image Trace function. This enhancement involves the ability to paint an image map that defines the complexity of the vector result. This feature would allow users to have more control over the detail and precision of different areas within an image when using the Image Trace tool.Proposed Functionality:
Image Map Tool:Introduce a new tool that allows users to paint directly onto the image, creating a map that indicates areas of different complexity.
Users can select different levels of complexity (e.g., high detail, medium detail, low detail) and paint these onto the image.
Complexity Settings:Provide options to adjust the complexity levels, allowing users to fine-tune the trace results for specific areas.
Include a preview option to see how the painted map affects the vectorization before finalizing the trace.
Integration with Image Trace:Integrate the painted image map with the existing Image Trace function, so the complexity map guides the tracing process.
Ensure the Image Trace function respects the defined complexity areas, resulting in a vector output that matches the user's desired detail levels.
User Interface:Create an intuitive and user-friendly interface for painting the complexity map, with clear visual indicators of the different complexity levels.
Allow for easy editing and refinement of the painted map.
Benefits:
Enhanced Control: Provides users with granular control over the detail and precision of the traced vector, improving the quality and relevance of the results.
Efficiency: Reduces the need for extensive post-trace editing by allowing users to define areas of high and low detail during the trace process.
Customization: Offers a more customizable and versatile Image Trace experience, catering to diverse artistic and design needs.
Use Case:
Designers working on complex images can use the painted image map to specify high-detail areas (e.g., faces, text) and low-detail areas (e.g., background, shadows). This ensures the vector result is optimized for their specific requirements, enhancing the overall workflow and output quality.Thank you for considering this feature request. I believe it will significantly enhance the functionality and user experience of Adobe Illustrator's Image Trace tool.
Feature Request: Paint an Image Map for Defining Complexity in Image Trace Function
Description:
I would like to request a feature enhancement for Adobe Illustrator's Image Trace function. This enhancement involves the ability to paint an image map that defines the complexity of the vector result. This feature would allow users to have more control over the detail and precision of different areas within an image when using the Image Trace tool.Proposed Functionality:
Image Map Tool:Introduce a new tool that allows users to paint directly onto the image, creating a map that indicates areas of different complexity.
Users…3 votes -
Selective Vectorize: Vectorize specific parts of an image with Image Trace
Vectorize specific parts of an image using this Selective Vectorize tool. It allows users to explicitly ignore certain parts of the image by marking only the required parts.
3 votesDear Users,
Introducing Selective Vectorization in Image Trace: Introducing the capability to selectively trace objects from a Raster Image. To use this capability:
- Select the selective vectorization tool from Image Trace Panel
- Hover over the Embedded Image, it will annotate the selected regions
- Use Up/Down arrow key to adjust the selected regions
- Clicking will select that part of image
- Use Shift key user can add to selection
- Use Option/Alt key to remove a selection
- Trace the Image
Note: Selective Vectorization only works on embedded images.
Known Issue: Annotation might appear incorrect when Image is scaled after place and embed.
Is this technology useful in your workflow?
Please try it out in BETA and let us know your feedback.
- Don't see your idea?