Illustrator (Desktop) Feature Requests
When entering a new feature request, please provide:
- Description
- Why is this valuable to you?
- or
4728 results found
-
Clip to key object
Illustrator allows to set a key object in a selection with a click. The object gets thick edge and can be used for aligning and distributing operation, to stay in place.
This simple way of marking an object is used only for these, and it’s a waste.
We need to be able to use key objects for other operations as well.For example, why not allow users to clip into the key object, if it’s set? Currently we would have to move it above other objects in a selection, reselect them together, and hope we didn’t mess it up... or cut the objects we need to clip, select the one to be a mask, toggle Draw Inside mode, Paste in Place (works if we need to save the appearance of the clipping path).
Why just not
1. Select objects
2. Click one to make it a key
3. Run Object > Clipping Mask > Make command (Cmd/Ctrl+7)?
Zero extra steps. No problems with 'should it be at top or bottom'.Illustrator allows to set a key object in a selection with a click. The object gets thick edge and can be used for aligning and distributing operation, to stay in place.
This simple way of marking an object is used only for these, and it’s a waste.
We need to be able to use key objects for other operations as well.For example, why not allow users to clip into the key object, if it’s set? Currently we would have to move it above other objects in a selection, reselect them together, and hope we didn’t mess it up... or…
10 votes -
Display artboard captions when exporting artboards
Every time when i have multiple artboards and hit Save As, Ii don't know exactly which artboards i want to include, cause i don't know the specific number.
So i go back out of the save as dialog, pick the Artboard Tool and save again, now able to see which numbers i want to include. I would be less time consumption if it would show the numbers of the artboards always no matter which tool is selected, when there is a save as or export dialog started.10 votes -
Chained dimensions
New Dimension tool is designed to be good-enough, but not be way too complex to setup and use.
One of things we need to be a part of this 'good-enough' set of features it has should be a way to create consequential serialized dimensions, like the image attached demonstrates.
To do that now, we’d have to drag each segment one-by-one, and snap the dimensions line to each other (which in the current build just doesn’t happen even!). This method is generates doubled lines instead of only one, and won’t allow us to move all the dimension lines at once if needed.
Most plugins that allow dimensioning in Illustrator have this feature, including CADtools and BPT-Pro.
New Dimension tool is designed to be good-enough, but not be way too complex to setup and use.
One of things we need to be a part of this 'good-enough' set of features it has should be a way to create consequential serialized dimensions, like the image attached demonstrates.
To do that now, we’d have to drag each segment one-by-one, and snap the dimensions line to each other (which in the current build just doesn’t happen even!). This method is generates doubled lines instead of only one, and won’t allow us to move all the dimension lines at once if…
10 votes -
Isolation tints eyedropper colors from linked assets
When using the eyedropper tool in isolation mode on artwork, the color is taken from the actual artwork even though isolation mode displays it as faded. When doing the same on linked assets, even if they are Illustrator files, the isolation mode fade gets applied to the sampled color. This means that you have to back out of isolation mode and direct-select it to sample the asset, or otherwise have already created a swatch before entering isolation.
I think it would be nicer if Illustrator could treat the sampling of linked assets the same way it does for local artwork - sampling the actual colors instead of the colors after fading is applied.
When using the eyedropper tool in isolation mode on artwork, the color is taken from the actual artwork even though isolation mode displays it as faded. When doing the same on linked assets, even if they are Illustrator files, the isolation mode fade gets applied to the sampled color. This means that you have to back out of isolation mode and direct-select it to sample the asset, or otherwise have already created a swatch before entering isolation.
I think it would be nicer if Illustrator could treat the sampling of linked assets the same way it does for local artwork…
10 votes -
More precision options for Dimension Tool
Please add: 0"-0 1/8" & 0"-0 1/16" to Unit precision. I really need 3/8", 5/8", 7/8"...
10 votes -
Live Free Distort
I would like to see the "Free Distort" effect be extended to work on the actual object, not going through a tiny dialog box that feels like I'm trying to apply it to a postage stamp. It's really difficult to apply a distorted shape to a larger area when I am guessing if a 1-pixel move of a tiny handle is going to make a difference or not. It would be amazing if four independent handles were on the actual art and allow me to move the corners exactly to the spot I want to place them at. It's a handy tool for the work I'm doing but would make my work much easier if it were more user-friendly. Right now it feels like a feature that is 1994-ish (and yes I was using Illustrator before then - still my favorite app of all time!)
I would like to see the "Free Distort" effect be extended to work on the actual object, not going through a tiny dialog box that feels like I'm trying to apply it to a postage stamp. It's really difficult to apply a distorted shape to a larger area when I am guessing if a 1-pixel move of a tiny handle is going to make a difference or not. It would be amazing if four independent handles were on the actual art and allow me to move the corners exactly to the spot I want to place them at. It's a…
10 votes -
Allow us to choose a preferable file format on Export or keep the last chosen one
Please create a hotkey for the "Export as" function. It would also be nice if I could set AI to always remember my preferred filetype instead of always defaulting to png.
10 votesLatest Illustrator builds now remember the chosen file format in the Export As dialog and keeps it between sessions.
-
Add Focus Fill and Focus Stroke commands we can assign hotkeys to
Illustrator focuses either a fill or a stroke to be set.
We can control the focus with the hardcoded X key, that toggles fill and stroke, but it also requires to know which is active at the moment to know if we should press it.It’d be faster for professional user to actually force the stroke or the fill to be active, with dedicated absolute keys instead of relative ones.
I’d use something Alt+X and Alt+Shift+X (these are free), or remapped them to something even more simpler.
There is a related request:
Absolute mode that always sets a fill a single click and stroke with the Alt+click/right click
http://illustrator.uservoice.com/forums/333657/suggestions/44104935Illustrator focuses either a fill or a stroke to be set.
We can control the focus with the hardcoded X key, that toggles fill and stroke, but it also requires to know which is active at the moment to know if we should press it.It’d be faster for professional user to actually force the stroke or the fill to be active, with dedicated absolute keys instead of relative ones.
I’d use something Alt+X and Alt+Shift+X (these are free), or remapped them to something even more simpler.
There is a related request:
Absolute mode that always sets a fill a…10 votes -
Change the cursor for Artboard Tool when a click is going to create a new object-sized artboard
When using Artboard Tool, you can do several things with a simple click.
1. Select an artboard under the cursor
2. Deselect an artboard if there is no artboards under the cursor
3. Create an artboard which size is the same as the object you click — but ONLY if the object is inside of the already selected artboard OR if the place you click is not inside of any artboard.This #3 case prevents deselecting artboards efficiently in cases when you don’t have 'naked canvas' inside of the viewport. And clicking is the only way to deselect artboards, since Deselect All command does not conform the mode — you can see details and upvote the problem here: http://illustrator.uservoice.com/forums/601447/suggestions/47070349
And because of that (and not only that), we need Ai to signal a click is going to create an artboard. Ai should modify the cursor to indicate this — and now it does not, AT ALL.
When using Artboard Tool, you can do several things with a simple click.
1. Select an artboard under the cursor
2. Deselect an artboard if there is no artboards under the cursor
3. Create an artboard which size is the same as the object you click — but ONLY if the object is inside of the already selected artboard OR if the place you click is not inside of any artboard.This #3 case prevents deselecting artboards efficiently in cases when you don’t have 'naked canvas' inside of the viewport. And clicking is the only way to deselect artboards, since…
10 votes -
Show 'Can’t join a path' message as a soft one
Modal dialogs are very dated. They grab attention, they interrupt workflows, they yell at you. Most times we don’t need these as loud as they are — a whisper is nice.
And Ai actually now has these, 'soft' messages, like the one we get when we modify a live shape — 'Shape expanded', at the top of the view, in a gray rectangle. Calm, non-intrusive, with auto-destruction timer. Nice!But there are other, legacy warnings and screams.
The most annoying for me persoanlly is the one I get when I try to join a closed path (just in case, to be sure it is closed), but Ai yells at me — 'you caaaaan't' — with a ding and a message and a text... just show the 'Path is already closed' soft message.Perhaps don’t mix all the cases together and display it as a huge page like you do. A user has a compound path within the selection? Tell it, and only if the user really has it. Same for other art types users can’t join.
I see an educational benefit in having it like this now... but look, if I enable 'don’t show this again' checkmark in this alert box, I won’t be able to see if I should join more or is it just enough.Modal dialogs are very dated. They grab attention, they interrupt workflows, they yell at you. Most times we don’t need these as loud as they are — a whisper is nice.
And Ai actually now has these, 'soft' messages, like the one we get when we modify a live shape — 'Shape expanded', at the top of the view, in a gray rectangle. Calm, non-intrusive, with auto-destruction timer. Nice!But there are other, legacy warnings and screams.
The most annoying for me persoanlly is the one I get when I try to join a closed path (just in case, to…10 votes -
Allow Transform effect applied to an object to transform its the opacity mask also
If I apply Transform effect to an object with an opacity mask (to move or scale it parametrically, for example), only the object will be transformed — but not the contents of its opacity mask.
This is not consistent with the destructive method, when you actually move or scale this object...The workaround is to apply the same effect to the contents of the opacity mask, but it does not always have the same effect, since the contents can have different bounds, and the transformation points will differ.
There should be an 'Affect Opacity Mask' option in the Transform effect dialog.
If I apply Transform effect to an object with an opacity mask (to move or scale it parametrically, for example), only the object will be transformed — but not the contents of its opacity mask.
This is not consistent with the destructive method, when you actually move or scale this object...The workaround is to apply the same effect to the contents of the opacity mask, but it does not always have the same effect, since the contents can have different bounds, and the transformation points will differ.
There should be an 'Affect Opacity Mask' option in the Transform effect…
10 votes -
Intertwine with Live Paint objects
It feels like a rare thing to do, but no — this is exactly what I needed recently, and it is forbidden, of course.
I had to expand my Live Paint group :(Please make sure all special plugin objects can work with each other.
10 votes -
Multiline tooltips
Plugin developers can’t make tooltips go in several lines. Extensive tooltips are forced to be one long line, and it’s hard to read in time.
Comes along with this request: http://illustrator.uservoice.com/forums/333657/suggestions/4664534810 votes -
Custom exposure time for hover tooltips for third-party developers
A narrow enough request. At the moment developers can’t customize the time each hover tooltip gets displayed. When the text is long, it vanishes too soon.
Comes along with this request: http://illustrator.uservoice.com/forums/333657/suggestions/4664537810 votes -
Create a shortcut to toggle between 2 different tools (e.g. brush & ink)
Would be nice to have a keyboard shortcut to toggle between 2 tools (e.g. brush and ink) I'm working on an illustration and would be so much faster if I could have just one key to toggle between both tools. This is possible in Photoshop. I don't understand why isn't possible in Adobe Illustrator :(
10 votes -
Make clickable areas for eye buttons in Layers and Appearance as large as their sections
As demonstrated in https://www.instagram.com/p/CmhJOBNo-U3/
Clicking an 'eye' requires aiming, despite the area it is located in is pretty large. What’s a point of limiting the clickable area?10 votes -
Learn to Rearrange artboards with coinciding or nested coordinates
Illustrator will not rearrange artboards that are completely overlapping (that is, have the same dimensions and coordinates) and will ignore nested artboards, moving them along with their enclosing artboard.
It should be able to detect complete copies and give an option to rearrange smaller nested ones.10 votes -
Remake the Tools / Menu Commands dropdown in Keyboard Shortcuts into two toggle buttons
Dropdown lists just from two elements are pure evil.
Illustrator has one in the Keyboard Shortcuts dialog.What’s a point of having it? Don’t you have enough space on the x-axis to display both items at once and improve the discoverability of both options?
As if you were hoping to get another item in that list and never added... in30 years.Remake it into two conjoined toggle buttons, or at list in a radio-group (ugh), but just allow users to see both available options at once.
10 votes -
Display command assigned hotkeys in Discover panel’s search results
When you search for a command in Discover panel, Illustrator gives you the results, but never actually tries to educate a user further with teaching him assigned keyboard shortcuts.
Figma does it!10 votes -
Make a more integrated way to report bugs
Figma allows to report bugs directly from the web app.
You go 'Help > Contact Us > Report a bug'. Then you fill out the form, directly in the app, provide steps, attach files... looks very similar to the approach Ai uses, but more streamlined, with no intermediate steps.
Once it’s done, the dropdown is collapsed, and you are where you were at the moment.To report bugs in Illustrator you have to search for the way.
First one should locate 'Help > Submit Bug/Feature Request'. This redirects you to the browser, to http://www.adobe.com/go/aiWishform/, which can redirect you (with a frightening autogenerated link) here to UserVoice — or kick to adobe.com, if you are lucky enough.
Then you have to register at UserVoice, switch between two windows, make effort...The difference is not that big, but reporting in Figma is a small interruption, while in Illustrator is the whole story.
Figma allows to report bugs directly from the web app.
You go 'Help > Contact Us > Report a bug'. Then you fill out the form, directly in the app, provide steps, attach files... looks very similar to the approach Ai uses, but more streamlined, with no intermediate steps.
Once it’s done, the dropdown is collapsed, and you are where you were at the moment.To report bugs in Illustrator you have to search for the way.
First one should locate 'Help > Submit Bug/Feature Request'. This redirects you to the browser, to http://www.adobe.com/go/aiWishform/, which can redirect you (with…10 votes
- Don't see your idea?