4773 results found

1. Numerate / Numbering / Sequential numbers / Number sequence / Auto-serialize

   As a function of the transform tool, or perhaps a tool in it's own right, a feature to numerate copies in sequence and/or apply fully scanning bar or QR codes. E.g. raffle tickets, concert tickets, coupons, vouchers, etc.

   This would be invaluable as a time-saving measure, and allow an artist/designer to keep something like tickets completely in-house. I've been working with Illustrator for 15 years, and to my knowledge there's no feature that does anything like this. When I design concert or raffle tickets I have to use a 3rd party vendor, pretty much just for the bar code and sequencing. The ability to number things seems like a natural extension of the Transform tool.

   MAKE IT SO!
   Spok, out.

   As a function of the transform tool, or perhaps a tool in it's own right, a feature to numerate copies in sequence and/or apply fully scanning bar or QR codes. E.g. raffle tickets, concert tickets, coupons, vouchers, etc.

   This would be invaluable as a time-saving measure, and allow an artist/designer to keep something like tickets completely in-house. I've been working with Illustrator for 15 years, and to my knowledge there's no feature that does anything like this. When I design concert or raffle tickets I have to use a 3rd party vendor, pretty much just for the bar code and… more

   •  

   9 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   5 comments  ·  Effects, Appearance, Graphic Styles  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Select non-default eGPU for hardware acceleration

   We use external GPUs as provided to us by Apple in the External Graphics Development Kit and want to use these eGPUs instead of default GPUs built into the MacBooks.

   9 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Performance, Enhancements  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Completed (Comments Open)  ·  Ashutosh Chaturvedi responded

   We have the fix available in the latest release. Please update Illustrator using Adobe Creative Cloud application to the latest build for version Illustrator CC 23.0.
   Please refer to our knowledge base FAQ – https://illustrator.uservoice.com/knowledgebase/articles/1844590 if you face difficulty in update.
   Or get in touch with us at any of the other support channels – https://helpx.adobe.com/support.html

   Warm Regards,
   Ashutosh Chaturvedi | Sr. Quality Engineering Manager – Illustrator
   Adobe. Make It an Experience.

3. Illustrator - PDF Export Cropmarks

   Illustrator really needs a usefull cropmark export option in the pdf export dialougue. just like InDesign. I mean it looks similar to InDesign but its simply not working! who needs cropmarks up to 15 mm long?? why cant i edit the length, width.. etc?. Please make this function usefull!! asap

   9 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Make Select Art button more evident

   I periodically see designers, with serious (albeit cheerful) faces, boldly clicking the 'round button' in Layers to 'select everything on the layer.'

   And while the button indeed 'selects' everything on a layer, it also selects the layer itself — targets it really, for applying a layer-specific appearance.

   Take a look at this GIF attached.
   If I select Layer 2 (with the green squares) like this, and then apply the Round Corners effect, all the new squares in the layer will have round corners.
   Sure, everything is visible in the Appearance palette.
   Sure, everything is written in the pop-up hints.

   The round ones are for appearance. We need to click to the right of the circle instead, where the square markers are drawn — these are there to mark selection... AND allow selection.

   It’s a very common mistake (like confusing windshield wipers and turn signals)...
   And I think I know why it happens. I’m convinced that it is psychologically easier to click a circle — that looks more like a button, — than an empty space where a square appears (when clicked).
   Recently some accessibility changes were introduced into Ai, and now things we can click in most panels gets highlighted slightly on hover — but not these square-to-be spots! Even when there are square markers there!

   So please make these more pronounced.

   I love appearance dearly, but selecting all in a layer / sublayer / group is a far more common procedure users do. And discovering something called 'appearance' was the source of many problems with art’s colors is not a good way to meet this power.

   I periodically see designers, with serious (albeit cheerful) faces, boldly clicking the 'round button' in Layers to 'select everything on the layer.'

   And while the button indeed 'selects' everything on a layer, it also selects the layer itself — targets it really, for applying a layer-specific appearance.

   Take a look at this GIF attached.
   If I select Layer 2 (with the green squares) like this, and then apply the Round Corners effect, all the new squares in the layer will have round corners.
   Sure, everything is visible in the Appearance palette.
   Sure, everything is written in the pop-up hints.

   The… more

   •  

   8 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Layout for Swatch Info should allow to set grid, not only a row or a column

   Creation dialog for Swatch Info object currently allows to choose between having it as a row or a column... great, when you have 5. Not great if there are 20 — it’s either a stupid long row, or a stupid tall column.
   Add another value there to wrap these, to form a grid!
   Make sure you also allow to set the layout order properly, like the Rearrange All Artboards dialog uses (RTL is a thing).

   8 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Text accessibility checker

   It would be great if adobe design tools provided a built in checker or warning system for type that does not meet the 4:5:1 standard for contrast. Currently I have to use third party tools to verify that the colors have enough contrast. Would be great if I could do that right in that app or if a warning popped up similar to overset text.

   8 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Force swatches when directly opening an image

   When we drag-n-drop / open an image into Illustrator, a new document is created with an artboard created to fit the image (when possible), and the image is put there.

   The Swatches panel in this case is empty (as well as Brushes, Symbols, Graphics Styles).

   While it makes sense (image have no presets stored within), for some users it’s extremely irritating — they treat this workflow as a way to quickly create a new document based on an image, with the fitting document profile used (even though if they have no idea about document profiles — thanks to the modern New Document dialog, concealing this aspect pretty well).

   Perhaps Ai should allow importing default swatches: RGB for an RGB image, and CMYK if it happens to be in CMYK.
   I can assume people might need to prefer their own swatch sources also.

   I doubt it should apply to other presets (styles, symbols, etc.), but perhaps someone in comment could argue.

   Finally, there is a similar request about native .ai files, generated with non-native applications:
   Global Swatches for Imported Files
   http://illustrator.uservoice.com/forums/333657/suggestions/33527599

   I’d advise to treat them togehter.

   When we drag-n-drop / open an image into Illustrator, a new document is created with an artboard created to fit the image (when possible), and the image is put there.

   The Swatches panel in this case is empty (as well as Brushes, Symbols, Graphics Styles).

   While it makes sense (image have no presets stored within), for some users it’s extremely irritating — they treat this workflow as a way to quickly create a new document based on an image, with the fitting document profile used (even though if they have no idea about document profiles — thanks to the modern… more

   8 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Images, Links  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Allow to show contents (unfurl) of compound paths in Layers

   Illustrator treats a compound path as a single entity, no matter how many singular paths it has inside.

   Layers panel does not display '>' next to the name of it, and does not allow to unfurl the item to see what it has inside.

   It makes sense in a way, since the order of items does not matter (it is for a Compound Shapes, where it matters a lot, with e.g. 'Minus Front').

   At the same time, we can still select a subpath of a compound path with the Group Selection tool, and use Object > Arrange commands (even though there is no visible result when we do that).

   But having these in a Layers tree can help.
   We can quickly evaluate the number of children objects, their own shapes with thumbnail previews rendered, quickly select one we need there and not on canvas... after all, it’s not something like a Dimension Object, which is a complex construct, not intended for direct editing, but a basic universal object, created to be edited!

   There are other limitations with subpaths of a compound path...
   ...like the inability to Allow to set key object inside compound path:
   http://illustrator.uservoice.com/forums/333657/suggestions/34270678

   Illustrator treats a compound path as a single entity, no matter how many singular paths it has inside.

   Layers panel does not display '>' next to the name of it, and does not allow to unfurl the item to see what it has inside.

   It makes sense in a way, since the order of items does not matter (it is for a Compound Shapes, where it matters a lot, with e.g. 'Minus Front').

   At the same time, we can still select a subpath of a compound path with the Group Selection tool, and use Object > Arrange commands (even though… more

   8 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Layers  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. An option to Remove Share Button completely

   Glad you can take the blue color off the Share button (based on this request: http://illustrator.uservoice.com/forums/333657/suggestions/44391642)
   Would LOVE to have the option of taking the share button off altogether.
   It's still large and distracting. Thanks!

   8 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Angular Smart Guides for everything, similar to those Snap to Glyph has

    There is a lesser known Snap to Glyph command in context menu, which allow you to snap to any live glyph under cursor. It requires Smart Guides and Snap tp Glyph commands enabled (and Snap to Grid disabled).

    Once you enter the mode, the chosen glyph is highlighted with a rectangle, and you are able to construct new art relative to points of this live glyph, as if it was outlined.
    These guides are green, similar to normal Glyph Guides, but some guides are unique to this mode, like the 'angular' one — which allows us to build on a continuation of an existing straight line — similar to what 'Line Extension' smart guide does (when not broken).

    This guide is missing in a non-glyph world, and it’s rather cool, and we’d benefit from having it for everything else, for all other tools: Pen, Selection, Scale... Please make it happen and add it as a n option in Preferences > Smart Guides.

    There is a lesser known Snap to Glyph command in context menu, which allow you to snap to any live glyph under cursor. It requires Smart Guides and Snap tp Glyph commands enabled (and Snap to Grid disabled).

    Once you enter the mode, the chosen glyph is highlighted with a rectangle, and you are able to construct new art relative to points of this live glyph, as if it was outlined.
    These guides are green, similar to normal Glyph Guides, but some guides are unique to this mode, like the 'angular' one — which allows us to build on a… more

    •  

    •  

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Snapping  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. More fields to Smart Guides angles

    Have you ever required to customize Illustrator more, well, this is a feature that is here a long time ago and it would be nice to have more options: In Preferences > Smart Guides, we should have more options to add custom angles, since six fields are falling short. Is this doable?

    •  

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Snapping  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. Leading / Line Height calculator (more Auto options)

    Illustrator now offers 120% as the default leading value.
    Changing it requires you to go to Justification dialog within the Character panel.
    The setting is global for the document.
    Changing the default value for all new documents requires editing [Normal Paragraph Style] in proper Document Profile (and default ones are reset every time Ai updates).

    Typography often requires more variety than just a value relative to font size.
    In real projects we have to calculate leading / line height based on line width, x-height... and also background, color, the font itself.

    While Ai hardly can do it all on its own (and it shouldn’t even try), having a way to quickly calculate a suitable leading / line height of an area type based on container’s dimension and the font size.

    Super wide lines (relative to font height) require more vertical space to help the eye to find the next line.

    Ultra short lines can have 100% or even smaller values.

    Obviously we don’t need these to be adjusted all the time we change the size of a container, and we don’t need it for each container in a document — unless we choose it. This should work as an option and a one-time operation.

    Illustrator now offers 120% as the default leading value.
    Changing it requires you to go to Justification dialog within the Character panel.
    The setting is global for the document.
    Changing the default value for all new documents requires editing [Normal Paragraph Style] in proper Document Profile (and default ones are reset every time Ai updates).

    Typography often requires more variety than just a value relative to font size.
    In real projects we have to calculate leading / line height based on line width, x-height... and also background, color, the font itself.

    While Ai hardly can do it all on its… more

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Holding Control key and clicking on a New Layer icon should create a new layer below, as in Photoshop

    Originally mentioned by Mohammed Amjed Khan Abro here: http://illustrator.uservoice.com/forums/333657/suggestions/41107321

    Layers Panel.
    Holding or pressing the Control key and clicking on a new layer icon in Photoshop to creates a new layer below all the layers if no layer is selected, if a layer is selected then you do the same action will create a new layer below the selected layer which really makes sense.
    The same thing would be very comfortable in Illustrator if that feature would be added in the Layers and Appearance Panel.

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    6 comments  ·  Layers  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. Make Illustrator inform users about the live shape nature of the path used for area type and provide associated controls for it

    Currently, when we use a live rectangle as a path for an area type, it secretly stays live shape inside, and it allows us to scale the object with the round corners honored. If we round corners for a rectangle-looking path (not live shape), corners will get stretched.

    However, there is no way to distinguish these two cases with UI, or to convert a rectangular path used for the area type into live rectangle shape, or to have shape-sepcific controls.

    Please refer to the discussion in comments for the details.

    This request is based on the original declined bug report below. Full text is given below.

    Area type rounded corners distort when resizing.
    Is it possible to make the corners remain live so they don't distort? See attached image.

    Currently, when we use a live rectangle as a path for an area type, it secretly stays live shape inside, and it allows us to scale the object with the round corners honored. If we round corners for a rectangle-looking path (not live shape), corners will get stretched.

    However, there is no way to distinguish these two cases with UI, or to convert a rectangular path used for the area type into live rectangle shape, or to have shape-sepcific controls.

    Please refer to the discussion in comments for the details.

    This request is based on the original declined bug report… more

    •  

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    4 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. Please add an ability to align points using the Align panel

    Please add an ability to align individual points using the Align panel. This has always been an option, but it seems to have been removed.

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Align, Distribute  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. Add an option to allow to snap to and by linked art, a similar one to Snap to Glyphs option

    Could it be possible to get some help to align to a graphic imported? Something like "Snap to Glyph"?
    It could help a lot to work precisely, without "embedding" the placed artwork...

    Originally by Jean-Michel Le Goff

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Snapping  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Add an option to customize the strikethrough or underlined text

    How is it possible that there are still no options to customize the strikethrough or underlined text???
    On the internet I found posts and requests dating back even 10 years ago??? O.O

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    6 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. True customizable drawing 'angles' for all tools when using SHIFT key (for Pen, Pencil, Brush, Move)

    This is severely lacking in Illustrator and has been developed by Affinity Designer with workarounds (that do not work in a suitably fluid way) by Astute Graphics for Illustrator.

    Best case scenario something is implemented like Affinity Designer in which 'constraint angles' are replaced by ‘Grid and Snapping Axis’ you are able to set and save presets of angle settings.

    These axis are set and then can be activated as a constraint on your current tool by holding shift.

    Smart guides provides this in a VERY limited way right now, the UI is very rudimentary for a setting that is so important.

    These settings need to be centralized in one place, not hidden!

    This is severely lacking in Illustrator and has been developed by Affinity Designer with workarounds (that do not work in a suitably fluid way) by Astute Graphics for Illustrator.

    Best case scenario something is implemented like Affinity Designer in which 'constraint angles' are replaced by ‘Grid and Snapping Axis’ you are able to set and save presets of angle settings.

    These axis are set and then can be activated as a constraint on your current tool by holding shift.

    Smart guides provides this in a VERY limited way right now, the UI is very rudimentary for a setting that is… more

    •  

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    7 comments  ·  Snapping  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Pencil and Brush Tools 'Pulled String' Smoothing / Stabilization

    I've been using Illustrator for a long time now and one of the things that have bugged me over the years is the fact that there's no brush stroke stabilization like the Pulled String Mode in Photoshop or the Rope Brush in Affinity Designer. Ai has evolved so much over the years and it's been used to create freehand vector art since day one, so I cannot understand why this function hasn't been developed yet as of 2024.

    Path Smooth or Fidelity are definitely two options to smooth out lines, but that's done once the path has been created. Stabilization, on the contrary, can give you very smooth lines while you're drawing them and with live feedback. I understand there's a plugin out there called DynamicSketch, but I would like to have this feature integrated directly into Illustrator instead of having to look for it elsewhere.

    I must say that I'm beyond impressed at how fluid and accurate the Rope Brush in Affinity Designer is, but unfortunately, I can't say the same thing about Photoshop's Pulled String Mode. Will we see this feature in Ai soon? I hope so.

    I've been using Illustrator for a long time now and one of the things that have bugged me over the years is the fact that there's no brush stroke stabilization like the Pulled String Mode in Photoshop or the Rope Brush in Affinity Designer. Ai has evolved so much over the years and it's been used to create freehand vector art since day one, so I cannot understand why this function hasn't been developed yet as of 2024.

    Path Smooth or Fidelity are definitely two options to smooth out lines, but that's done once the path has been created. Stabilization,… more

    •  

    •  

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    5 comments  ·  Tools  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. An ability to create custom bevel profiles for 3D and Materials Extrude

    We can create our own profiles for now Classic Extrude, by modifying the Bevels.ai — located here:
    Mac: /Applications/Adobe Illustrator [version]/Support Files/Resources/[locale]
    Win: C:\Program Files\Adobe\Adobe Illustrator [version]\Support Files\Required\Resources[locale]

    But changing the file does nothing to customize bevels for the modern 3D!
    They seem to be hardcoded.
    Please, make the same file to be recognized by the modern 3D, or perhaps come up with some better way, that does not require to modify a red-only file and restarting Ai — for both 3D methods.

    8 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Effects, Appearance, Graphic Styles  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating