134 results found

1. Color palette overrides fill colors and color modes in Illustrator 2018

   Hi, I am a design professor and most students in my class experienced a specific problem when we were doing an exercise to learn how to apply the correct color palettes to different logo files. Specifically, we created fictional identity designs as a means to learn how to create a production-ready bundle of files (a logo with versions in b&w, spot color (Pantone), 4-color process, and RGB). Almost 100% of my 18 students had their 4-color process file -- which was filled with CMYK colors upon designing, and should have stayed CMYK -- show up as being filled with RGB when opened after having been closed.

   Through testing this unusual pattern of error across all of their files, it appears that Adobe Illustrator will choose to show colors in the color palette that was last opened within the application, and if the palette isn't the same as the fill colors, it creates a color translation of what the color should be into what it want to show you. Stated another way, the students had trouble getting the color palette to hold the color information they entered (percentages/values of either CMYK or RGB, in particular). Regardless of what they had entered, a computer with one or the other of these color palettes open would override their settings. Unacceptable. In one case, I also witnessed a student manually enter RGB values, only to deselect the item, select the object again, and then find different RGB values in place than those I watched him enter. In 19 years of teaching, I've never seen this problem be so widespread across student files.

   For what it's worth, the Pantone palette behaved. The problem specifically is between RGB and CYMK colors/color palettes. PLEASE FIX THIS. This will cause major problems in real projects that rely upon color mode accuracy. Please contact me with information about the problem and/or solution. We would appreciate a follow-up.

   Hi, I am a design professor and most students in my class experienced a specific problem when we were doing an exercise to learn how to apply the correct color palettes to different logo files. Specifically, we created fictional identity designs as a means to learn how to create a production-ready bundle of files (a logo with versions in b&w, spot color (Pantone), 4-color process, and RGB). Almost 100% of my 18 students had their 4-color process file -- which was filled with CMYK colors upon designing, and should have stayed CMYK -- show up as being filled with RGB… more

   22 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Under Review  ·  7 comments  ·  Colors, Swatches, Patterns  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

2. Alt-Drag to Duplicate (and Shift to align) Only Works Intermittently

   Duplicating objects in Illustrator CC 2017 only works on occasion, it is not consistent as it was in previous versions. Holding Shift to align while dragging and duplicating also doesn't work. These were both key features of Illustrator and if there is a way to fix this problem I would be very interested to know how!

   22 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   26 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Under Review  ·  AdminAnkit Goyal(Illustrator Team) (Admin, Adobe Illustrator) responded

   Hi,

   Thanks for reporting this issue, Illustrator team really appreciate this.

   We are able to reproduce this issue and it is currently under review.

   Regards
   Ankit Goyal

3. Clipping mask from a live text is misaligned / resized / distorted

   When using a solid swatch filled variable font as a clipping mask (Hepta Slab in the attached example) the clipped paths are misaligned with the font (in display and in selection hovering).

   • 

   •  

   •  

   • 

   •  

   21 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   7 comments  ·  Clipping, Intertwine  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Under Review  ·  AdminIllustrator Engineering (Software Engineer, Adobe Illustrator) responded

   Hi,

   Thanks for the information provided to the Illustrator team.

   We are able to reproduce this issue at our end and the engineering team is currently isolating this issue further to get to the root cause.

   With Best Regards,

   Aishwarya G Gadodia

   Illustrator Team

4. Image Trace has a problem keeping the artwork in the same location from the original.

   Illustrator version 22.0.1

   Image trace seems to have a problem keeping artwork in the same location from the original. Screen Shot 1 shows some text that I have rasterized to be image traced. I work at a die making facility so rasterized images need to be made into vectors for our CNC machines to "read them."

   As it stands, if I image trace this text it is going to be transposed to the right and below the original. The image traced result in Screen Shot 2 is the magenta color. My original rasterized image is in black. When this specific problem comes up we have to manually move the image traced result back over the top of the rasterized art to ensure that it is in the exact position or our CNC machines will be off and ruin dies by milling into image area.

   Illustrator version 22.0.1

   Image trace seems to have a problem keeping artwork in the same location from the original. Screen Shot 1 shows some text that I have rasterized to be image traced. I work at a die making facility so rasterized images need to be made into vectors for our CNC machines to "read them."

   As it stands, if I image trace this text it is going to be transposed to the right and below the original. The image traced result in Screen Shot 2 is the magenta color. My original rasterized image is in black. When this specific… more

   •  

   •  

   19 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Under Review  ·  9 comments  ·  Tools  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

5. Non Functional Gradient Stroke along/across options when stroke is outside/inside

   make a box, add a gradient stroke, apply gradient across stroke, align stroke to outside - you can't button does nothing.
   so
   make a box, add a gradient stroke, align stroke to outside THEN click apply gradient across stroke...button is active but does nothing

   I have been reporting this bug and hoping for a fix for 4 years now. Going to give me back some of that money I have been giving you LOL?

   First post July 2013...

   https://forums.adobe.com/thread/1263557

   again July 2015
   https://forums.adobe.com/thread/1907689
   again
   Dec 2015
   https://forums.adobe.com/thread/2021452
   Nov 2016
   https://forums.adobe.com/thread/1247459
   Jan 2017
   https://forums.adobe.com/thread/2265213

   made bug reports each time, but always post to the forum so I have a record as well.

   make a box, add a gradient stroke, apply gradient across stroke, align stroke to outside - you can't button does nothing.
   so
   make a box, add a gradient stroke, align stroke to outside THEN click apply gradient across stroke...button is active but does nothing

   I have been reporting this bug and hoping for a fix for 4 years now. Going to give me back some of that money I have been giving you LOL?

   First post July 2013...

   https://forums.adobe.com/thread/1263557

   again July 2015
   https://forums.adobe.com/thread/1907689
   again
   Dec 2015
   https://forums.adobe.com/thread/2021452
   Nov 2016
   https://forums.adobe.com/thread/1247459
   Jan 2017
   https://forums.adobe.com/thread/2265213

   made bug reports each time, but always… more

   19 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   6 comments  ·  Strokes  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Under Review  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

   This is obviously not fixed and requires further inspection.

6. 特定のテキスト状態のファイルを開くと旧バージョンで保存されたファイルと誤検知される

   Windows11（macOSでも発生すると思われる）
   Illustrator ver.29.0

   再現手順
   １．新規ドキュメントを作成し文字ツールでポイントテキストを入力する。
   ２．１行目を36pt、２行目を10ptで指定する。
   ３．Illustrator2020形式でファイルを保存して閉じる。
   ４．保存したファイルを開くと「このファイルには旧バージョンのIllustratorで作成されたテキストが含まれます……」のダイアログが表示される。変更を確認しても文字のずれなどは見受けられない。

   期待する結果
   ver.29で保存したドキュメントを開く時にダイアログが表示されない。

   実際の結果
   特定のテキスト構成にて旧バージョンで作成されたドキュメントと正確でないダイアログが表示される。
   おそらく誤検知だと思われます。

   以下のコミュニティ投稿もご覧ください。
   https://community.adobe.com/t5/illustrator%E3%83%95%E3%82%A9%E3%83%BC%E3%83%A9%E3%83%A0-discussions/illustrator-2025%E3%81%AE%E3%83%86%E3%82%AD%E3%82%B9%E3%83%88%E3%82%A8%E3%83%B3%E3%82%B8%E3%83%B3%E3%81%AE%E3%83%90%E3%82%B0/td-p/14943654?profile.language=ja

   • 

   18 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Under Review  ·  3 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

7. オプティカルカーニングのテキストにタブを設定しても揃わない - Optical kerning text does not align when tabs are set

   「文字間のカーニング：オプティカル」のテキストに「タブ」パネルで「タブ位置」と「リーダー」を設定しても、タブの位置で文字が揃わない。

   MacOS Monterey（12.7.4） + Illustrator 2024（28.4.1）

   再現手順:
   1. テキストオブジェクトに文字パネルで「文字間のカーニング：オプティカル」を設定する
   2. 「タブ」パネルで「タブ揃え」、「タブ位置」、「リーダー」を設定する

   期待された結果:
   指定したタブ揃え・タブ位置でテキストが揃う

   実際の結果:
   指定したタブ揃え・タブ位置でテキストが揃わない

   回避方法:
   ・テキスト中のタブのみに「オプティカル」以外のカーニングを設定する
   ・タブを設定したテキストでは「オプティカル」以外のカーニングを利用する

   「オプティカル」以外のカーニングを利用すれば回避できますが、フォントや文字の内容によっては「オプティカル」を使いたいこともあります。その都度タブのみに「メトリクス」等を設定するのは手間がかかります。また、「リーダー」に記号等を設定しなければテキストは揃いますが、それではタブの機能を利用する意味がありません。
   InDesignにも同様の機能がありますが、カーニングの設定が何であれテキストの位置はタブ位置で揃います。
   ユーザーの工夫で回避するのではなく、Illustrator側が改善すべき挙動だと考えます。

   ---Use translation tools---

   When "Tab" and "Leader" are set on optical kerning texts, texts are not aligned at the tab position.

   Steps to reproduce:
   1. set optical kerning to the text.
   2. set tab alignment, tab position, and leader in the "Tabs" panel.

   Expected result
   Text is aligned at the specified position.

   Actual result:.
   Text is not aligned at the specified position.

   Workaround
   - Set kerning other than "optical" only for tabs in text.
   - Use kerning other than "optical" for tab-set text.

   We can get around this by using kerning other than "Optical", but we want to use "Optical" for some fonts and content. It is time-consuming to set "Metrics" etc. only for tabs each time. Also, if "Leader" is empty, texts will be aligned, but that does not make sense to use tab feature.
   InDesign has a similar feature, but whatever kerning setting is, texts are aligned at the tab position.
   I think Illustrator behavior should be improved, rather than working around it with user ingenuity.

   「文字間のカーニング：オプティカル」のテキストに「タブ」パネルで「タブ位置」と「リーダー」を設定しても、タブの位置で文字が揃わない。

   MacOS Monterey（12.7.4） + Illustrator 2024（28.4.1）

   再現手順:
   1. テキストオブジェクトに文字パネルで「文字間のカーニング：オプティカル」を設定する
   2. 「タブ」パネルで「タブ揃え」、「タブ位置」、「リーダー」を設定する

   期待された結果:
   指定したタブ揃え・タブ位置でテキストが揃う

   実際の結果:
   指定したタブ揃え・タブ位置でテキストが揃わない

   回避方法:
   ・テキスト中のタブのみに「オプティカル」以外のカーニングを設定する
   ・タブを設定したテキストでは「オプティカル」以外のカーニングを利用する

   「オプティカル」以外のカーニングを利用すれば回避できますが、フォントや文字の内容によっては「オプティカル」を使いたいこともあります。その都度タブのみに「メトリクス」等を設定するのは手間がかかります。また、「リーダー」に記号等を設定しなければテキストは揃いますが、それではタブの機能を利用する意味がありません。
   InDesignにも同様の機能がありますが、カーニングの設定が何であれテキストの位置はタブ位置で揃います。
   ユーザーの工夫で回避するのではなく、Illustrator側が改善すべき挙動だと考えます。

   ---Use translation tools---

   When "Tab" and "Leader" are set on optical kerning texts, texts are not aligned at the tab position.

   Steps to reproduce:
   1. set optical kerning to the text.
   2. set tab alignment, tab position, and leader in the "Tabs" panel.

   Expected result
   Text is aligned at the specified position.

   Actual result:.
   Text is not aligned at the specified position.

   Workaround
   - Set kerning other than "optical" only for tabs in text.
   - Use kerning other than… more

   •  

   18 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Under Review  ·  1 comment  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

8. Line tool is immune to the Constrain Angle

   When you set up Constraint Angle to 30 or whatever is different form 0 or 90, pick up Line tool and hold Shift, it still snaps to 0, 45, 90, 135... instead of 30, 75, 120, 165...

   18 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   6 comments  ·  Tools  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Under Review  ·  Anjali responded

   Thank you for reporting the issue.
   The engineering team is looking into the concern.

   Regards

9. delete anchor point tool selecting bottom object

   When two anchors of different objects are layered on top of one another, the delete anchor point tool will always select the bottom object, whether I have the top object selected or not. The add anchor point tool and direct selection will select the top object, but I want to be able to delete the anchor from the top object without having to go into isolation mode. This wasn't the case in the previous version.

   18 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Under Review  ·  6 comments  ·  Tools  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

10. Gradient tool issues

    1. Handles on on object's Gradient Annotator are difficult to adjust once a gradient has been dropped. Usually, handles simply don't respond. User needs to start from scratch and create a brand new gradient rather than make small adjustments to existing ones.

    2. Repeated but not consistent bug: adjusting one gradient causes changes to unrelated gradients on same document.

    3. Live preview of gradient tool is prohibitively slow, esp when gradient is anywhere near an existing Effect.

    FIX: Allow us to toggle the preview effect.

    1. Dropping a color onto the gradient slider, color creates a new color-point onto slider, immediately next to existing color-point, rather than dropping color onto the existing color-point, creating extra color points. Usually happens further than the desired color, usually black or white leftover from default gradient. See attachment.

    1. Handles on on object's Gradient Annotator are difficult to adjust once a gradient has been dropped. Usually, handles simply don't respond. User needs to start from scratch and create a brand new gradient rather than make small adjustments to existing ones.

    2. Repeated but not consistent bug: adjusting one gradient causes changes to unrelated gradients on same document.

    3. Live preview of gradient tool is prohibitively slow, esp when gradient is anywhere near an existing Effect.

    FIX: Allow us to toggle the preview effect.

    1. Dropping a color onto the gradient slider, color creates a new color-point onto slider, immediately next to existing… more

    •  

    18 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    12 comments  ·  Other...  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close
    Under Review  ·  AdminAnkit Goyal(Illustrator Team) (Admin, Adobe Illustrator) responded

    Hi All,

    Thanks for reporting this issue. We understand your problem and investigating this issue from tolerance perspective of gradient widget on screen and slider.  We will require some specific information to investigate the other Gradient Issues, Kindly add your vote on relevant thread for below issues:

    Repeated but not consistent bug: adjusting one gradient causes changes to unrelated gradients on same document. → https://illustrator.uservoice.com/forums/601447-illustrator-desktop-bugs/suggestions/44461230-adjusting-one-gradient-causes-changes-to-unrelated  

    Live preview of gradient tool is prohibitively slow, esp when gradient is anywhere near an existing Effect. → https://illustrator.uservoice.com/forums/601447-illustrator-desktop-bugs/suggestions/44461233-live-preview-of-gradient-tool-is-prohibitively-slo

    Gradient tool on desktop similar to the iPad version! → https://illustrator.uservoice.com/forums/333657/suggestions/46159303

    Thanks for your patience and support!

    Ankit Goyal, Illustrator Team

11. ドキュメントのグループの抜きを設定したドキュメントをPDFで書き出したものがオーバープリントプレビューの表示と異なる

    macOS13.6.7/iMac27inch(Intel)
    Illustrator ver.28.6

    再現手順
    1. いくつかの図形を重ねて合成モードを乗算に設定したうえでグループ化しグループの抜きのチェックボックスを外す。
    2. ドキュメントのグループの抜きを設定する。
    3. PDF X4で保存する。
    4. そのPDFをAcrobatで開く。
    5. Illustrator上でのオーバープリントプレビューの表示と異なる。

    Actual result
    PDFを書き出した状態とIllustrator上での表示が異なる。

    Expected Result
    PDFの表示とIllustrator上での表示が同じになる。

    Illustrator上でのグループの構造の違いがIllustrator上のレンダリング結果とPDF書き出し結果で相違が生じています。1でのグループの抜きのチェックを外したグループではIllustrator上ではグループ内ので抜き処理を行わず合成モードの処理を行います。これがPDFを書き出した際にグループの抜きと解釈され、全てがノックアウトされた状態でPDFが作成されます。どちらが正しいかという事は難しいのですが、グループに設定されたノックアウトを拒否する設定をPDF書き出し時にも有効にするほうが表現の幅が拡がるように思います。

    EN
    Step to reproduce
    1. Overlap some shapes, set each objects the blending mode to Multiply, group them, and uncheck the KnockoutGroup checkbox in the Opacity panel.
    2. Set the Page Knockout Group.
    3. save the document as PDF X4 format.
    4. Open the PDF in Acrobat.
    5. The overprint preview in Illustrator is different between PDF.

    Actual result
    The display in Illustrator is different from the exported PDF.

    Expected Result
    The display of the PDF and the display on Illustrator will be the same.

    The difference in the group structure in Illustrator causes a difference between the rendering result
    Even if a page knockout group is set, Illustrator will not perform knockout processing for group that unchecked knockout groups and will process in blending mode. However, when outputting a PDF, all objects are written out in a knockout. It is difficult to say which is correct, but it seems to me that the range of expression would be expanded if the setting to deny knockouts for groups were also enabled for PDF export.

    macOS13.6.7/iMac27inch(Intel)
    Illustrator ver.28.6

    再現手順
    1. いくつかの図形を重ねて合成モードを乗算に設定したうえでグループ化しグループの抜きのチェックボックスを外す。
    2. ドキュメントのグループの抜きを設定する。
    3. PDF X4で保存する。
    4. そのPDFをAcrobatで開く。
    5. Illustrator上でのオーバープリントプレビューの表示と異なる。

    Actual result
    PDFを書き出した状態とIllustrator上での表示が異なる。

    Expected Result
    PDFの表示とIllustrator上での表示が同じになる。

    Illustrator上でのグループの構造の違いがIllustrator上のレンダリング結果とPDF書き出し結果で相違が生じています。1でのグループの抜きのチェックを外したグループではIllustrator上ではグループ内ので抜き処理を行わず合成モードの処理を行います。これがPDFを書き出した際にグループの抜きと解釈され、全てがノックアウトされた状態でPDFが作成されます。どちらが正しいかという事は難しいのですが、グループに設定されたノックアウトを拒否する設定をPDF書き出し時にも有効にするほうが表現の幅が拡がるように思います。

    EN
    Step to reproduce
    1. Overlap some shapes, set each objects the blending mode to Multiply, group them, and uncheck the KnockoutGroup checkbox in the Opacity panel.
    2. Set the Page Knockout Group.
    3. save the document as PDF X4 format.
    4. Open the PDF in Acrobat.
    5. The overprint preview in Illustrator is different between PDF.

    Actual result
    The display in Illustrator is different from the exported PDF.

    Expected Result
    The display of the PDF and the… more

    • 

    16 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Under Review  ·  2 comments  ·  Other...  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

12. 和文組版の横組み文字列中の文字回転

    Illustratorの日本語組版で、横組み文字列中の1文字を回転すると、文字が上下・左右に暴れて表示されてしまいます。
    ※縦組み中ではそういった不具合は観察されません。
    添付ファイルのように検証してみましたが、その回転の際の原点あるいは挙動原理などがよくわかりません。
    例えば、添付ファイル右下のように補正してみても、同じファミリー内でウエイトを変更しただけでもその補正値は変わるようです（平均字面が関係している？）。
    和文書体は、（欧文ベールライン位置や平均字面は様々でも）基本的には正方形の仮想ボディに納められていますので、仮想ボディの中心を回転の原点としていただければ、このような補正の手間がなくなるのではないだろうか？ と考えられます。
    挙動を変更していただければ、作業者の負担も軽減されるでしょう。

    なお、このような「横組み文字列中のひと文字を回転する」という処理は、あまり日常的にすることではありませんので、既存ファイルへの影響も軽微なものであろうと考えていますが、変更していただくならば、【その変更を周知】していただくことは大切なことだと申し添えておきます。

    よろしくお願いします。

    • 

    16 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Under Review  ·  0 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

13. Cambria text & large text cursor

    Looks like this was happening in 2017 as well... when using Cambria font, the cursor is 2 or 3 times as large as it should be when editing text. Makes highlighting & editing multiple rows almost impossible. I'd attach a file but others have shown the same thing already and it's simply a text box with Cambria text and a huge cursor. Text size is 11, height set at 13. In the same document but a text box using BonvenoCF, the cursor is the right height.
    Macbook Pro Mojave 10.14.5
    Adobe Illustrator CC 23.0.4

    16 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Documents and Artboards  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close
    Under Review  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

    The team is now intending to fix this

14. Performance issues in pixel preview on 5K retina screen

    When working in pixel preview mode on the retina screen of my iMac, the scrolling and zooming in Illustrator are very laggy. Please do the needful ASAP or we plan to move to "Affinity" because illustrator is unusable for me and its impact our workflow.

    16 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    14 comments  ·  Rendering Issues (GPU, CPU)  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close
    Under Review  ·  Anish Kumar responded

    Hi All,

    Thanks for reporting this issue and sorry for getting back so late. We are able to reproduce this issue at our end and it is currently under review.

    Thanks
    Anish Kumar
    Illustrator Team

15. Preferences reset to default... EVERY time I open Illustrator

    Every time I open Illustrator, all preferences are reset to the defaults. EVERY preference, EVERY time. I've saved custom workspaces, keyboard shortcuts, etc. and those are available to be activated, every time I open the application.
    Using AI CC 2018 (22.0.1) on Windows 7, with Cloud disabled.
    I do NOT have the option to install the latest patch; I don't even have access to menu item "Check for Updates."
    Would be EXTREMELY helpful if Adobe would make the list of fixes for each patch available. I have no way of knowing when there's been an update, or what was patched in any update.
    This is the buggiest version of Adobe software (Illustrator and InDesign) I've ever seen. I've been using ALL the core Adobe apps since their initial release (1980's, 1990's).

    Every time I open Illustrator, all preferences are reset to the defaults. EVERY preference, EVERY time. I've saved custom workspaces, keyboard shortcuts, etc. and those are available to be activated, every time I open the application.
    Using AI CC 2018 (22.0.1) on Windows 7, with Cloud disabled.
    I do NOT have the option to install the latest patch; I don't even have access to menu item "Check for Updates."
    Would be EXTREMELY helpful if Adobe would make the list of fixes for each patch available. I have no way of knowing when there's been an update, or what was patched… more

    15 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    25 comments  ·  Other...  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close
    Under Review  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

    The issues seems to happen again in 28.0 and 28.1

    The team is now aware of the bug.

    Still — please comment and upvote to help the team to get statistics on the magnitude of the problem.

16. Words get broken when hyphenation is off with no hyphens

    Illustrator (since a long ago) has a habit of breaking words in area type texts when it should not. Take a look at the test file and watch the attached GIF.

    As you can see, the second word is a long one, and Ai for some reason breaks it — although Hyphenate is off (and the language is properly chosen).

    No hyphen also is displayed at the end of the line, the word is just split.

    If we toggle the Composer from Single-Line to Every-Line, Ai at first correct the tracking and fits the word... but once the container is resized, it gets broken again... and sometimes, when nothing else is done, it gets recalculated again! ...but sometimes not, and it’s even worse, because non-reliable.

    InDesign does it properly, whatever composer is chosen, whatever language.
    No hyphenation should mean NO hyphenation. Words should break like this only when a container width is smaller than the word — and you can see it’s not the case here.

    Works the same on Mac and Windows.

    Illustrator (since a long ago) has a habit of breaking words in area type texts when it should not. Take a look at the test file and watch the attached GIF.

    As you can see, the second word is a long one, and Ai for some reason breaks it — although Hyphenate is off (and the language is properly chosen).

    No hyphen also is displayed at the end of the line, the word is just split.

    If we toggle the Composer from Single-Line to Every-Line, Ai at first correct the tracking and fits the word... but once the container is… more

    • 

    •  

    14 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    6 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close
    Under Review  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

    It turns out the file in the original report has a singular Latin 'o' mixed into the Cyrillic text, and this makes it break without a hyphen.

    The font team notifies that Unicode standart prescribes to not break between two scripts that use spaces as word breaks, so this problem can fixed sometimes later, when the team revises their reflow strategy.

    As for now, be notified it’s a very narrow case, and is a good sign that your text has homoglyphs in it.

17. ファイル→書き出しにてJPEGを書き出す際、圧縮方式が選択したものと異なる場合がある

    Windows10/21H1 Adobe IllustratorCC 26.0.3

    問題が発生したときに実行していた手順
    1.アートワークをアートボード上に作成する。
    2.ファイル→書き出し→書き出し形式を選択しJPGを選択する。
    3.ダイアログ上で圧縮方式を「ベースライン（最適化）」を指定しJPEGファイルを書き出す。
    4.書き出されたJPEGファイルは圧縮方式がプログレッシブになっている。

    想定していた結果
    指定したベースライン（最適化）でJPEGファイルが作成される。

    実際の結果
    圧縮方式がプログレッシブにて書き出される。

    この症状はWindows版のみで起こるようです。また、書き出し状態が異なるケースも見られるようなので他のパラメータによる影響を受けている可能性も残ります。
    わたしが検証したファイル３種類を添付します。それぞれがファイル名に付けた圧縮形式で書き出しを行っていますが、バイナリデータを見てもベースライン最適化とプログレッシブのマーカーが入れ替わっている状態です。
    この問題については以下のスレッドをご参照下さい。

    https://community.adobe.com/t5/illustratorフォーラム-discussions/illustratorでjpeg書き出しするとプログレッシブになる/m-p/12795818#M27679

    •  

    •  

    •  

    14 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Under Review  ·  2 comments  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

18. SVG Export Missing XML Encoding Tag

    The latest updates to Illustrator (21.0.1) seems to have removed the all-important encoding tag required by browsers to render SVG appropriately when embedding etc. in an html page.

    It exports the svg without this tag at the beginning of the file.
    <?xml version="1.0" encoding="UTF-8" ?>

    14 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Under Review  ·  14 comments  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

19. Adobe Illustrator 27.8.1 creates a pdf where the colour space of the custom profile is incorrect

    Hello,
    I came back from holiday today and a colleague at work told me that she can't create PDF files from Adobe Illustrator with the output intent that it saves but reports a colour space error when opened in Adobe Acrobat. First I deleted all the presets but the error remained. I also tried creating a PDF file with other profiles (created by us) and the error was there for all of them. But if I used the default profiles from Adobe (e.g. Iso Coated v2), the PDF file can be opened correctly. Finally I downgraded Illustrator to version 27.7 and there it works as it should. But if I upgrade to version 27.8.1, the error is back.

    I have uploaded a video where you can see this. The link is here: https://youtu.be/nVlqHXCEx3s

    Strangely, it works for me and my colleague, where we also already have version 27.8.1, so far. Why it does for us but not for my colleague, I have no idea.

    I am posting the original file below, and then the PDF created at my colleague's place in version 27.8.1 and in version 27.7. Also the profile and Acrobat settings used and the PDF.

    I don't know where else to report this error, hopefully someone here will notice.

    Does anyone else have a similar problem as well?

    Ales

    Original AI File - https://1url.cz/Huwaj
    PDF created in AI 27.8.1 - https://1url.cz/puwaD (Adobe Acrobat opens with the error "An error occurred while processing the page. Erroneous color space")

    PDF created in AI 27.7 - https://1url.cz/nuwaC
    Icc profil - https://1url.cz/GuwaU
    Adobe PDF Setting - https://1url.cz/Muwag
    Adobe Illustrator Setting - https://1url.cz/cuwaS

    Hello,
    I came back from holiday today and a colleague at work told me that she can't create PDF files from Adobe Illustrator with the output intent that it saves but reports a colour space error when opened in Adobe Acrobat. First I deleted all the presets but the error remained. I also tried creating a PDF file with other profiles (created by us) and the error was there for all of them. But if I used the default profiles from Adobe (e.g. Iso Coated v2), the PDF file can be opened correctly. Finally I downgraded Illustrator to version 27.7… more

    •  

    13 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    5 comments  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close
    Under Review  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

    The team has identified the problem and working on the solution. Thank you for the report and the comments.

20. Copying tables from InDesign and only the text pastes in Illustrator

    Hello, I used to be able to copy a table I created in InDesign and copy and paste it into Illustrator with all of the formatting being the same. Now when I go to paste a table, all of the table formatting is missing and it's just a big block of text. Please fix this soon as my company does this on a day-to-day basis for our images. I attached an image of what it looks like when I paste the table in Illustrator.

    •  

    13 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    5 comments  ·  Effects, Appearance, Graphic Styles  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close
    Under Review  ·  AdminRama (Mgr, Software Development, Adobe Illustrator) responded

    Illustrator team is working on a fix for this issue. Meanwhile you can use the below workaround to paste the table as it was before.

    
    

    Before you copy the table in InDesign, create a path object along with table and then copy from InDesign and Paste in Illustrator. This forces the PDF route for copy/paste between ID and AI