Illustrator (Desktop) Feature Requests
When entering a new feature request, please provide:
- Description
- Why is this valuable to you?
- or
No existing idea results
- ~ No ideas found ~
4697 results found
-
path eraser tool - erasing multiple path selection (worked in CS5, does not in CC)
I jumped from CS5 to the current CC version of illustrator. As a technical illustrator, I often need to erase portions of paths. The easiest method for accomplishing this task is to select all the paths I intend to erase portions of using the "path eraser tool" and simply go from path to path erasing what I need using the "path eraser tool". This function works properly in CS5 but at some point afterwards has been lost.
However, as soon as you erase a portion of the first path, all selected paths are unselected except for the current path being erased. In CC, I have to individually select a path then erase, select another path then erase, a process that is very time consuming and tiresome. Someone raised the question if "keep paths selected" was checked in pencil settings. This settings only appears to "keep" paths selected for the newly drawn path...not paths being erased using the "path eraser tool".
I've attempted to use the standard "eraser" tool for this purpose, though, the erased results on paths using the "eraser" tool are very unpredictable (rendering the eraser useless for erasing paths) as it changes the control points and handle values as well as generally erases too much.
Why did this path eraser tool function vanish in CC??? I need it desperately as I am sure most users would value it's return as well.
It's been three years since an original post to the community forum, can someone at Adobe please kindly respond here??
Thanks in advance.
I jumped from CS5 to the current CC version of illustrator. As a technical illustrator, I often need to erase portions of paths. The easiest method for accomplishing this task is to select all the paths I intend to erase portions of using the "path eraser tool" and simply go from path to path erasing what I need using the "path eraser tool". This function works properly in CS5 but at some point afterwards has been lost.
However, as soon as you erase a portion of the first path, all selected paths are unselected except for the current path being…
6 votes -
Actions panel
Everything is so tiny, and the actions panel is too. When you run an action you see all steps, and if you want to try another of your actions you have to scroll a mile to get there. It's very difficult to get an overview of the actions you have. So I would like to see the steps of the action in a separate window, so that you don't loose the overview of your actions. You shouldn't see all steps in the same list as the actions that you have. Also I would like to be able to have some little icons or something that make me see the difference between actions. I don't always remember name of all actions. I think the same applies to all your brushes, tools, patterns swatches presets etc. It's so difficult to get a proper overview, a visual overview that makes sense. I want that.
Everything is so tiny, and the actions panel is too. When you run an action you see all steps, and if you want to try another of your actions you have to scroll a mile to get there. It's very difficult to get an overview of the actions you have. So I would like to see the steps of the action in a separate window, so that you don't loose the overview of your actions. You shouldn't see all steps in the same list as the actions that you have. Also I would like to be able to have some…
6 votes -
Support layers in patterns
I want to be able to make patterns in layers. So if I use layers when I make a pattern, then I get a pattern that is editable in layers. It would save much time if you want to make variations.
6 votes -
Copy parts from multiple layers into multiple layers
I work with a lot of parts that I need to keep separated for output. A simple example is a complex, compound shape with 20 elements. I have 10 on a "cut" layer and 10 on a "print" layer. If I copy and paste them, I can only paste them into one layer. I might want them to go back into the same layers or into 2 new layers. I never want them in the same layer. I now have to go in and separate them all into the proper layers.
This is important because the layers tell our output machines what to do with the files.
I work with a lot of parts that I need to keep separated for output. A simple example is a complex, compound shape with 20 elements. I have 10 on a "cut" layer and 10 on a "print" layer. If I copy and paste them, I can only paste them into one layer. I might want them to go back into the same layers or into 2 new layers. I never want them in the same layer. I now have to go in and separate them all into the proper layers.
This is important because the layers tell our output…
6 votesYou can enable Paste Remembers Layers in the panel’s menu to make Illustrator remember layers your objects were copied from and insert them on layers with same name when pasted. If these layers don’t exist, Illustrator will create them. Be careful and disable it when not needed, if might make a mess when not needed. Also note that with this option enable everything copied from an isolation mode creates a separate 'Isolation mode' layer, which is stupid — vote here if you think this should be addressed: https://illustrator.uservoice.com/forums/601447-illustrator-desktop-bugs/suggestions/37935496-paste-remembers-layers-bug-with-isolation-mode -
An option to Consider End Handles when filling open paths
In illustrator we can to adjust start and end point handles in open path, but it have not much sense. What about to consider this handles to adjust shape of the object fill. Not on strait line like usual, but in way like we want. By the way, if we decide to close the path, Ai should make it in that way too.
So, we doesn't need two objects with stroke and shape separately, it will be one object with adjustable end handles.6 votes -
All the features of Adobe XD are presented in Adobe Illustrator CC
All the features of Adobe XD are presented in Adobe Illustrator CC (allowing Illustrator to make designs for website and apps prototypes quickly and easily). Increase process speed in opening large files from Adobe Illustrator and save large files in Adobe Illustrator CC.
6 votes -
Support single one line fonts
Hi,
I have tried Illustrator to design name tags to engrave on our engraving machine. Unfortunately single line fonts, which are essential for some engravings, isn't working properly. Bought them from onelinefonts.com and they are working flawless in most other apps, but none of Adobe's so far.
6 votes -
Use Key Object to allow precise control for in-back and in-front level changes
Allow Key Object to define which object is moved and which object is used to define movement. If I select two objects and then highlight one as a key object, it would be nice to use the same hotkeys for "send to back" and "send to front" and have it only work in relation to the two selected objects, putting the keyed object either directly in front of or behind in the layer order of the other object.
As it is now, the hotkeys either work too much by sending objects all they way to the back or front, or too little by requiring a one layer change per use. On builds with many objects/layers this just feels inefficient and clumsy. Adding in the Key Object feature would allow users to have a second level of functionality and quickly place a layer exactly where they want it quickly, using a feature that is already in place to give them more precise control over object placement.
Thanks for a great product and the years of creative expression it has provided!
Allow Key Object to define which object is moved and which object is used to define movement. If I select two objects and then highlight one as a key object, it would be nice to use the same hotkeys for "send to back" and "send to front" and have it only work in relation to the two selected objects, putting the keyed object either directly in front of or behind in the layer order of the other object.
As it is now, the hotkeys either work too much by sending objects all they way to the back or front, or…
6 votes -
Assets Export - add "Find" option by asset name
I'm looking for just option to filter assets at Asset Panel. It's easy to select some assets, for example I have objects names "ground_xx.png" and I want just export them now, so I can type in filter "ground" and it will be filtered from all other my assets, and yes, better to add option select filtered.
6 votes -
Dynamic Bezier Stroke Corner Join
Illustrator offers 3 types of stroke corner joins: Miter, Round, Bevel (same 3 as Offset Path filter/effect do).
Miter one just extends the edges of a stroke with straight lines and then cuts the pointy portion off according to Miter Limit value. This works in a majority of cases when we need a sharp corner, but when curvy segments meet at an angle... the straight join becomes obvious.
Meanwhile, Ai has Join Tool.
Here, at the left side of the image a result of expanding a stroke, with a straight mitered join is rather obvious.
So I select the point where the straight segments meet, delete it, and then use the Joint Tool to... well, to join them, following the natural Bezier extensions of the segments.This gives me a better looking smoother join, with no obvious 'ah, that's a thick stroke expanded'. I can use this method when I have a handful of these... but it’s not convenient to treat hundreds of these, expanding your artwork.
Another solution would be to use inside/outside stroke alignment...
But:
1. it still doesn’t work for open paths — http://illustrator.uservoice.com/forums/333657/suggestions/33963553 (100 votes!)
2. it won’t be helpful anyway if sharp connections happen from both sides of a line, both at inside and outside oneSo — please introduce the fourth type of a stroke corner join. Make it fall back to just simple Miter if the curvature of the lines doesn’t allow for them to meet properly (or cheat by changing the curvature just a bit).
Illustrator offers 3 types of stroke corner joins: Miter, Round, Bevel (same 3 as Offset Path filter/effect do).
Miter one just extends the edges of a stroke with straight lines and then cuts the pointy portion off according to Miter Limit value. This works in a majority of cases when we need a sharp corner, but when curvy segments meet at an angle... the straight join becomes obvious.
Meanwhile, Ai has Join Tool.
Here, at the left side of the image a result of expanding a stroke, with a straight mitered join is rather…5 votes -
Enable continuous work while generating vector graphics
Currently, when generating a vector graphic within Adobe Illustrator, the entire application becomes unresponsive for approximately 30 seconds (or longer, depending on complexity). This forces users to wait idly without being able to continue their work, significantly disrupting workflow, concentration, and productivity.
I request that Adobe implement a background processing feature that would allow users to continue drawing, editing, or performing other tasks within Illustrator while vector graphics are being generated in the background.
Thank you!
Danny5 votes -
Rotate bounding box only
It’s similar to a request to do it on iPad I made: http://illustrator.uservoice.com/forums/931888/suggestions/46244521
Ditto.
Ai should give us a mode to freely rotate the bounding box the way we need, to zero or any angle.
There should be a way to quickly align it to a chosen straight segment or even a point.Affinity Designer has a feature that can be used for this purpose, Select > Cycle / Set Selection Box — even though it doesn’t exactly does the same thing.
There are also two plugin methods to achieve this in Ai today:
1. ToolShed plugin by Graffix: https://rj-graffix.com/product/toolshed/ (it introduces a separate tool for transforming, to avoid dealing with Ai’s bugged accumulated rotation — the tool allows to 'visually set the bounding box angle in order to stretch the art along any angle you choose')
2. Bounding Box Tool by Totallypic: https://totallypic.com/digital-downloads/categories/plugins (not sure though it’s still available separately now, the developer intended to include it in their larger IllustKit plugin)It’s similar to a request to do it on iPad I made: http://illustrator.uservoice.com/forums/931888/suggestions/46244521
Ditto.
Ai should give us a mode to freely rotate the bounding box the way we need, to zero or any angle.
There should be a way to quickly align it to a chosen straight segment or even a point.Affinity Designer has a feature that can be used for this purpose, Select > Cycle / Set Selection Box — even though it doesn’t exactly does the same thing.
There are also two plugin methods to achieve this in Ai today:
1. ToolShed plugin…5 votes -
Control which tool is activated by the eraser end of my stylus
I do all my work with a drawing stylus and have never found the native Eraser tool to be useful. Instead I use Astute's Opacity Brush, which lets you quickly paint opacity masks for the selected objects.
I'd love to be able to access it by flipping my stylus over and eraser-clicking, but that only gets the Eraser tool.
Before the Opacity Brush came up I've had other thoughts for this - how about assigning the eraser end of the stylus to your favorite selection tool instead of constantly hitting hotkeys to switch to and from it, for instance?
I do all my work with a drawing stylus and have never found the native Eraser tool to be useful. Instead I use Astute's Opacity Brush, which lets you quickly paint opacity masks for the selected objects.
I'd love to be able to access it by flipping my stylus over and eraser-clicking, but that only gets the Eraser tool.
Before the Opacity Brush came up I've had other thoughts for this - how about assigning the eraser end of the stylus to your favorite selection tool instead of constantly hitting hotkeys to switch to and from it, for…
5 votes -
Highlight the current color in Recent Colors section, just as in Swatches
I love Recent Colors. Can you please make it so that selecting an object highlights its color in the Recent Colors section, the same way it does in Swatch Tiles?
5 votes -
Image Trace needs 'Simplify' option we can disable
Image Trace is still not functioning properly. The 'Simplify' feature is still missing. Forcing Simplify should not be allowed.
5 votes -
Integrate the path length information from the "Document Info" panel into the "Info" panel
Bonjour, serait-il possible d'intégrer l'information de la longueur du "panneau informations sur le document" dans le "panneau infos" . (regrouper la longueur/périmètre avec la surface sur un même panneau.
5 votes -
Allow to exclude handles from being snapped to grid
I remember it being a bug, when handles were not snapping to grid... but sometimes it’s actually useful! Currently we have to undo, disable the grid, and tweak the handle.
There should either be a hard option we can toggle (preferably with an ability to assign it to a hotkey), or a hotkey to toggle this behavior on the fly, the one we can tap while dragging and disable snapping for this operation only... or both!Please take a look at this related request as well:
Introduce a tolerance for Snap to Grid / Pixel, so that snapping happens only when points are close enough to grid intersections
https://illustrator.uservoice.com/forums/333657/suggestions/49616738
This should also apply to handles, of course.I remember it being a bug, when handles were not snapping to grid... but sometimes it’s actually useful! Currently we have to undo, disable the grid, and tweak the handle.
There should either be a hard option we can toggle (preferably with an ability to assign it to a hotkey), or a hotkey to toggle this behavior on the fly, the one we can tap while dragging and disable snapping for this operation only... or both!Please take a look at this related request as well:
Introduce a tolerance for Snap to Grid / Pixel, so that snapping happens only…5 votes -
Allow to actually drag-n-drop swatches on canvas to create a Swatch Info object
Von Glitschka originally requested this here — http://illustrator.uservoice.com/forums/333657/suggestions/40192993 — but instead we got a buried menu command we can’t assign to a hotkey (here’s a request about this: http://illustrator.uservoice.com/forums/333657/suggestions/49612313)
Please allow to create these with the actual drag-n-drop!
Make it so we can hold a modifier key while doing this to have a dialog (and do it silently by default instead).
Allow to add dragged swatches into the existing Swatch Info objects, highlight the exact positions these are going to be added, on canvas.5 votes -
Allow to create Swatch Info object using a hotkey
Currently to create a Swatch Info object you need to dive into the Swatches panel’s flyout menu and locate a command. We need a way to assign a hotkey to this.
Actually, we need a way to assign hotkeys to ALL commands hidden in the panel menus — here is a general request about this: http://illustrator.uservoice.com/forums/333657/suggestions/46432486 (and even a larger request to hotkey everything at all: http://illustrator.uservoice.com/forums/333657/suggestions/31609237)
More of it, we need to be able to create Swatch Info objects with drag-n-drop (as Von Glitschka originally requested: http://illustrator.uservoice.com/forums/333657/suggestions/40192993).
There is now a separate request specifically about this, to evaluate the real need, please upvote this as well —Currently to create a Swatch Info object you need to dive into the Swatches panel’s flyout menu and locate a command. We need a way to assign a hotkey to this.
Actually, we need a way to assign hotkeys to ALL commands hidden in the panel menus — here is a general request about this: http://illustrator.uservoice.com/forums/333657/suggestions/46432486 (and even a larger request to hotkey everything at all: http://illustrator.uservoice.com/forums/333657/suggestions/31609237)
More of it, we need to be able to create Swatch Info objects with drag-n-drop (as Von Glitschka originally requested: http://illustrator.uservoice.com/forums/333657/suggestions/40192993).
There is now a separate request specifically about this, to…5 votes -
Allow to copy the area value from the Info panel
Why can we copy a HEX color from the Color panel, but can’t copy the area of it (or any other value as well)?
In some cases we need to get the value to share with someone, and now Ai wants us to retype it.
Sometimes we also need these to be placed on canvas — but I think it’s a job for the Dimension tool? Why Measure and Dimension are different tools in the first place?
5 votes
- Don't see your idea?