Illustrator (Desktop) Feature Requests
When entering a new feature request, please provide:
- Description
- Why is this valuable to you?
- or
4662 results found
-
Press Alt while creating a radius / diameter dimension to toggle these two mode on the fly
Currently Dimension tool requires you to orient your cursor when creating a radius or diameter: inside of the clicked shape to create a diameter or outside to make it a radius.
This is very nifty, sure.
But:The tool hardly tells you about it when you draw. The only hint Ai give us is a blue bar (that we all tired of seeing, because everything in Ai now pops and shouts and distracts — I’m speaking about use, Text To Vector!) — I attach the screenshot of it for those who blinked and missed it.
If I work with a tiny circle and I want to mark a diameter for it, I’d have to precisely aim inside of this little area — and this give me very little control over the angle of the line produced. Especially important, since you just ignore Shift to constrain the angle, which is respected by any other construction tool in Ai.
Here is a request about Shift, BTW: http://illustrator.uservoice.com/forums/333657/suggestions/47734580
So, for this request, please introduce a modifier key we can use to toggle radius/diameter as we draw, without moving the cursor in or out.
Opt / Alt will do.Currently Dimension tool requires you to orient your cursor when creating a radius or diameter: inside of the clicked shape to create a diameter or outside to make it a radius.
This is very nifty, sure.
But:The tool hardly tells you about it when you draw. The only hint Ai give us is a blue bar (that we all tired of seeing, because everything in Ai now pops and shouts and distracts — I’m speaking about use, Text To Vector!) — I attach the screenshot of it for those who blinked and missed it.
If I work with a…
9 votes -
Press Shift to constrain the angle of a radius / diameter dimension
Shift is universally used to constrain a drawn art to 0-45-90° angles when using a tool. This applies to lines, rectangles, other shapes, anything that can be clearly oriented.
The Dimension tool breaks the paradigm — we can’t hold shift to constraint the angle of the drawn dimension line when creating radii or dimeters.
Some standards require us to have these lines too use integer steps, like 15° or 30°... this is very hard to comply now.
Please either make the tool to respect angles set in Preferences > Smart Guides, or make it a separate setting in the tool’s options.
Shift is universally used to constrain a drawn art to 0-45-90° angles when using a tool. This applies to lines, rectangles, other shapes, anything that can be clearly oriented.
The Dimension tool breaks the paradigm — we can’t hold shift to constraint the angle of the drawn dimension line when creating radii or dimeters.
Some standards require us to have these lines too use integer steps, like 15° or 30°... this is very hard to comply now.
Please either make the tool to respect angles set in Preferences > Smart Guides, or make it a separate setting in the tool’s…
9 votes -
More precision options for Dimension Tool
Please add: 0"-0 1/8" & 0"-0 1/16" to Unit precision. I really need 3/8", 5/8", 7/8"...
9 votes -
Allow us to choose a preferable file format on Export or keep the last chosen one
Please create a hotkey for the "Export as" function. It would also be nice if I could set AI to always remember my preferred filetype instead of always defaulting to png.
9 votesLatest Illustrator builds now remember the chosen file format in the Export As dialog and keeps it between sessions.
-
Change the cursor for Artboard Tool when a click is going to create a new object-sized artboard
When using Artboard Tool, you can do several things with a simple click.
1. Select an artboard under the cursor
2. Deselect an artboard if there is no artboards under the cursor
3. Create an artboard which size is the same as the object you click — but ONLY if the object is inside of the already selected artboard OR if the place you click is not inside of any artboard.This #3 case prevents deselecting artboards efficiently in cases when you don’t have 'naked canvas' inside of the viewport. And clicking is the only way to deselect artboards, since Deselect All command does not conform the mode — you can see details and upvote the problem here: http://illustrator.uservoice.com/forums/601447/suggestions/47070349
And because of that (and not only that), we need Ai to signal a click is going to create an artboard. Ai should modify the cursor to indicate this — and now it does not, AT ALL.
When using Artboard Tool, you can do several things with a simple click.
1. Select an artboard under the cursor
2. Deselect an artboard if there is no artboards under the cursor
3. Create an artboard which size is the same as the object you click — but ONLY if the object is inside of the already selected artboard OR if the place you click is not inside of any artboard.This #3 case prevents deselecting artboards efficiently in cases when you don’t have 'naked canvas' inside of the viewport. And clicking is the only way to deselect artboards, since…
9 votes -
Add First Object Above / Last Object Below commands in Select menu
Illustrator provides two ways to access Next Object commands:
1. From Select menu
2. From the context menu, Select submenuAnd while the context menu provides four commands, the Select menu gives only two. First Object Above / Last Object Below — for no apparent reason — are missing, and we can’t assign hotkeys to these because of it.
Please add them there.
Also consider this request, to be able to select ALL objects above or below the current selection: https://illustrator.uservoice.com/forums/333657-illustrator-desktop-feature-requests/suggestions/34306246-select-objects-above-below-current-layer-objec
Note that this one is basically about 'select those who intersect', while we are also interested in 'select those which are above below in stack'.
Finally, here is a bug report about Select Next Object commands in context menu (and only these, not their main Select menu analogs) not working at all: https://illustrator.uservoice.com/forums/601447-illustrator-desktop-bugs/suggestions/46742011-select-next-object-commands-in-context-menu-are-br
Illustrator provides two ways to access Next Object commands:
1. From Select menu
2. From the context menu, Select submenuAnd while the context menu provides four commands, the Select menu gives only two. First Object Above / Last Object Below — for no apparent reason — are missing, and we can’t assign hotkeys to these because of it.
Please add them there.
Also consider this request, to be able to select ALL objects above or below the current selection: https://illustrator.uservoice.com/forums/333657-illustrator-desktop-feature-requests/suggestions/34306246-select-objects-above-below-current-layer-objec
Note that this one is basically about 'select those who intersect', while we are also interested in 'select those…
9 votes -
Show 'Can’t join a path' message as a soft one
Modal dialogs are very dated. They grab attention, they interrupt workflows, they yell at you. Most times we don’t need these as loud as they are — a whisper is nice.
And Ai actually now has these, 'soft' messages, like the one we get when we modify a live shape — 'Shape expanded', at the top of the view, in a gray rectangle. Calm, non-intrusive, with auto-destruction timer. Nice!But there are other, legacy warnings and screams.
The most annoying for me persoanlly is the one I get when I try to join a closed path (just in case, to be sure it is closed), but Ai yells at me — 'you caaaaan't' — with a ding and a message and a text... just show the 'Path is already closed' soft message.Perhaps don’t mix all the cases together and display it as a huge page like you do. A user has a compound path within the selection? Tell it, and only if the user really has it. Same for other art types users can’t join.
I see an educational benefit in having it like this now... but look, if I enable 'don’t show this again' checkmark in this alert box, I won’t be able to see if I should join more or is it just enough.Modal dialogs are very dated. They grab attention, they interrupt workflows, they yell at you. Most times we don’t need these as loud as they are — a whisper is nice.
And Ai actually now has these, 'soft' messages, like the one we get when we modify a live shape — 'Shape expanded', at the top of the view, in a gray rectangle. Calm, non-intrusive, with auto-destruction timer. Nice!But there are other, legacy warnings and screams.
The most annoying for me persoanlly is the one I get when I try to join a closed path (just in case, to…9 votes -
Show the exact location where snapping to grid occurs
Snap to Grid is underrated. Illustrator makes everything to make it uncomfortable to use: no constantly available indicator, clashing with Smart Guides, the general lack of customization (https://illustrator.uservoice.com/forums/333657-illustrator-feature-requests/suggestions/32403847-make-center-point-visible-while-dragging-art)...
And also it does not give enough feedback on WHERE the moved / transformed object snaps to, to which exact gridlines’ intersection.
Something just happens!
Look at the GIF — this 13.25×13.25 magenta square feels like it’s lagging, also I’m just trying to position it.Look at the second GIF, from Affinity Designer. Can you spot the difference? We can clearly see which point it snaps to, no problem. Well, almost clearly, lines get drawn too late and too pale to my taste... but at least they exist!
Hello, Illustrator?
Snap to Grid is underrated. Illustrator makes everything to make it uncomfortable to use: no constantly available indicator, clashing with Smart Guides, the general lack of customization (https://illustrator.uservoice.com/forums/333657-illustrator-feature-requests/suggestions/32403847-make-center-point-visible-while-dragging-art)...
And also it does not give enough feedback on WHERE the moved / transformed object snaps to, to which exact gridlines’ intersection.
Something just happens!
Look at the GIF — this 13.25×13.25 magenta square feels like it’s lagging, also I’m just trying to position it.Look at the second GIF, from Affinity Designer. Can you spot the difference? We can clearly see which point it snaps to, no problem. Well,…
9 votes -
Allow Transform effect applied to an object to transform its the opacity mask also
If I apply Transform effect to an object with an opacity mask (to move or scale it parametrically, for example), only the object will be transformed — but not the contents of its opacity mask.
This is not consistent with the destructive method, when you actually move or scale this object...The workaround is to apply the same effect to the contents of the opacity mask, but it does not always have the same effect, since the contents can have different bounds, and the transformation points will differ.
There should be an 'Affect Opacity Mask' option in the Transform effect dialog.
If I apply Transform effect to an object with an opacity mask (to move or scale it parametrically, for example), only the object will be transformed — but not the contents of its opacity mask.
This is not consistent with the destructive method, when you actually move or scale this object...The workaround is to apply the same effect to the contents of the opacity mask, but it does not always have the same effect, since the contents can have different bounds, and the transformation points will differ.
There should be an 'Affect Opacity Mask' option in the Transform effect…
9 votes -
Intertwine with Live Paint objects
It feels like a rare thing to do, but no — this is exactly what I needed recently, and it is forbidden, of course.
I had to expand my Live Paint group :(Please make sure all special plugin objects can work with each other.
9 votes -
Multiline tooltips
Plugin developers can’t make tooltips go in several lines. Extensive tooltips are forced to be one long line, and it’s hard to read in time.
Comes along with this request: http://illustrator.uservoice.com/forums/333657/suggestions/466453489 votes -
Custom exposure time for hover tooltips for third-party developers
A narrow enough request. At the moment developers can’t customize the time each hover tooltip gets displayed. When the text is long, it vanishes too soon.
Comes along with this request: http://illustrator.uservoice.com/forums/333657/suggestions/466453789 votes -
Be able to create a finished vector repeat tile from Pattern Editing Mode.
Currently, the only way for a designer to get a final tile from a repeat pattern created in pattern mode is a clunky workaround involving dragging the fill swatch art from the swatches panel to the artboard and then working with the bounding shape to create a cropped, repeatable tile for export. We need a button to click inside pattern mode that creates a tile from the artwork inside pattern mode that is perfectly cropped (could be a clipping mask) but will retain all the live content that typically gets expanded when you exit pattern mode. This option should allow you to generate a half-drop tile based on the tile edge or a tile based on the swatch bounds. I'm sure most designers would prefer to be able to use live content (brushes, freeform gradients, and tools like the Eraser in Pattern Mode) but barring that, we really need finished vector tiles with content that's not expanded. And, we need those tiles without the clunky fill swatch bounding shape workaround.
Currently, the only way for a designer to get a final tile from a repeat pattern created in pattern mode is a clunky workaround involving dragging the fill swatch art from the swatches panel to the artboard and then working with the bounding shape to create a cropped, repeatable tile for export. We need a button to click inside pattern mode that creates a tile from the artwork inside pattern mode that is perfectly cropped (could be a clipping mask) but will retain all the live content that typically gets expanded when you exit pattern mode. This option should allow…
9 votes -
Create a shortcut to toggle between 2 different tools (e.g. brush & ink)
Would be nice to have a keyboard shortcut to toggle between 2 tools (e.g. brush and ink) I'm working on an illustration and would be so much faster if I could have just one key to toggle between both tools. This is possible in Photoshop. I don't understand why isn't possible in Adobe Illustrator :(
9 votes -
Make clickable areas for eye buttons in Layers and Appearance as large as their sections
As demonstrated in https://www.instagram.com/p/CmhJOBNo-U3/
Clicking an 'eye' requires aiming, despite the area it is located in is pretty large. What’s a point of limiting the clickable area?9 votes -
Learn to Rearrange artboards with coinciding or nested coordinates
Illustrator will not rearrange artboards that are completely overlapping (that is, have the same dimensions and coordinates) and will ignore nested artboards, moving them along with their enclosing artboard.
It should be able to detect complete copies and give an option to rearrange smaller nested ones.9 votes -
Remake the Tools / Menu Commands dropdown in Keyboard Shortcuts into two toggle buttons
Dropdown lists just from two elements are pure evil.
Illustrator has one in the Keyboard Shortcuts dialog.What’s a point of having it? Don’t you have enough space on the x-axis to display both items at once and improve the discoverability of both options?
As if you were hoping to get another item in that list and never added... in30 years.Remake it into two conjoined toggle buttons, or at list in a radio-group (ugh), but just allow users to see both available options at once.
9 votes -
Display command assigned hotkeys in Discover panel’s search results
When you search for a command in Discover panel, Illustrator gives you the results, but never actually tries to educate a user further with teaching him assigned keyboard shortcuts.
Figma does it!9 votes -
Make Properties panel to have the same width as other panels
Properties is the widest panel among other panels in Illustrator.
While other panels by default have the same width (and some are resizable), Properties is too wide.It gets specifically disgusting whet it get stacked with other panels — they have to conform the minimal width of Properties and start looking ugly.
At the same time, the main content of Properties does not look like it needs all that minimal width — there is a huge gap on the right visible in 'properties_1.png' attached.
Sure, when you have some art selected, it look differently, like in 'properties2.png'... but look at the 'properties3.png' — the Transform panel is not that wide in fact! It’s analog in Properties is just bloated!
Align section can be just reorganized (and include more options and ditch the dropdown, because Align has 3 buttons instead of it now), and this also applies to other sections as well.The only problem is the Quick Actions buttons, which are two in a row.
Some languages use much longer words than English, and these buttons get even longer even, sure.
But it does not mean you have to bloat! Make them reflow and go stacked, when the width is not enough. See, you have a huge Recolor at the bottom, stick to that way!Also, perhaps you want to remove gaps between all bottom buttons in the full Align panel, to make it have the same default width? It got changed when you made Align To options into buttons, and it’s kinda ugly. Buttons are great though!
This request originates form this bug report, about the unadjustable width of the Properties panel, when it’s stacked with other resizable panels: https://illustrator.uservoice.com/forums/601447/suggestions/32011942
Properties is the widest panel among other panels in Illustrator.
While other panels by default have the same width (and some are resizable), Properties is too wide.It gets specifically disgusting whet it get stacked with other panels — they have to conform the minimal width of Properties and start looking ugly.
At the same time, the main content of Properties does not look like it needs all that minimal width — there is a huge gap on the right visible in 'properties_1.png' attached.
Sure, when you have some art selected, it look differently, like in 'properties2.png'... but look…
9 votes -
Place embedded pdf Link with Option to Convert all text as outlines
When opening a pdf in illustrator, if the pdf contains fonts that are not installed on the system. it will ask to find the font. and substitute a system default. the vector data for that font is in the pdf. if you take the same pdf, place it as a link, then flatten transparency, you can select "Convert all text to outlines", I would like the option to select "Convert all text to outlines" when embedding a placed PDF, so all fonts will be outlines and show properly even if font is not shown. it would use pdf font data to outline.
When opening a pdf in illustrator, if the pdf contains fonts that are not installed on the system. it will ask to find the font. and substitute a system default. the vector data for that font is in the pdf. if you take the same pdf, place it as a link, then flatten transparency, you can select "Convert all text to outlines", I would like the option to select "Convert all text to outlines" when embedding a placed PDF, so all fonts will be outlines and show properly even if font is not shown. it would use pdf font data…
9 votesHello,
We have started working on the tech that allows us to enable the following:
- Ability to convert the outlined/expanded text back to live text.
- Ability to lock objects to a character/glyph of a live text, allowing users to change the text (properties) while the object stays locked into the character.
As we work through the complexities of handling different font families, font size, and other font properties, we would love to meet with you and share our thinking around it and understand :
- Your use cases and workflows that this feature will help you with.
- What is most essential for you.
- The workarounds that you currently use to achieve this.
If you are interested, please pick a time slot that works for you using this link. https://calendly.com/meetai/60min?month=2023-01
- Don't see your idea?