8138 results found

1. Copying (Ctrl+C) a Radial repeated object with a drop shadow causes crash

   Illustrator 29.61

   I was able to re-create the crash with the following steps:

   Create New Document.
   Create 5 basic shapes, group them.
   From the application menu, go to Object->Repeat->Radial and apply it to the group.
   
   Double click on the original group to isolate it, from the appearance panel add a fx drop shadow to the grouped object.
   Exit isolation.
   select the repeated group and copy it
   Crash.

   Playing around with this, the crash only occurs when you add the drop shadow after applying the radial repeat. The easy solution is to apply the drop shadow prior to applying the repeat.

   I did not test other fx options.

   Illustrator 29.61

   I was able to re-create the crash with the following steps:

   Create New Document.
   Create 5 basic shapes, group them.
   From the application menu, go to Object->Repeat->Radial and apply it to the group.
   
   Double click on the original group to isolate it, from the appearance panel add a fx drop shadow to the grouped object.
   Exit isolation.
   select the repeated group and copy it
   Crash.

   Playing around with this, the crash only occurs when you add the drop shadow after applying the radial repeat. The easy solution is to apply the drop shadow prior to applying the repeat.

   … more

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   2 comments  ·  Repeats  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. モノクロになってしまう

   illustrator2025
   Windows11

   Adobeクラウドに保存していたものを開くと「プレビューを終了できません。指定した処理を実行できませんでした」というポップアップが出てしまい、保存していたものがモノクロになってしまって編集もできない。クラウドの一覧で見ると正常そう。

   •  

   •  

   •  

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   4 comments  ·  Rendering Issues (GPU, CPU)  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. Cursor stays invisible after exiting Presentation mode

   How to reproduce:
   Create a multiple artboard document.
   Enter presentation mode.
   Do not move the mouse.
   Use the left and right arrow keys to view all the art boards.
   Note that windows will make the mouse cursor invisible since you are not using it.
   Press ESC to return to normal viewing/editing mode.
   Now the mouse cursor is invisible.

   Work around: If you go back to presentation mode and wiggle the mouse and press ESC while the mouse is visible then the mouse will be visible in normal screen mode.

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   4 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Brushes become a lighter tint of black in an RGB document when expanded or rasterized.

   Brushes like Art Brushes are based on a CMYK document. They were created with C0 M0 Y0 K100.
   When these brushes are used in an RGB document with an RGB black (0/0/0) for the stroke, the result will be around a lighter 10% black than expected because the CMYK black will be converted to RGB.
   You can check that by expanding, rasterizing or Output Preview in Acrobat.
   If they had been created in the CMYK document with a 100% Grey instead of CMYK values, they would have converted to the darkest black in an RGB documents (greyscale always keep their values when converted between RGB and CMYK documents).

   Brushes like Art Brushes are based on a CMYK document. They were created with C0 M0 Y0 K100.
   When these brushes are used in an RGB document with an RGB black (0/0/0) for the stroke, the result will be around a lighter 10% black than expected because the CMYK black will be converted to RGB.
   You can check that by expanding, rasterizing or Output Preview in Acrobat.
   If they had been created in the CMYK document with a 100% Grey instead of CMYK values, they would have converted to the darkest black in an RGB documents (greyscale always keep their… more

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Brushes  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. When I make a change in text, the font reverts to the previously used font

   Hello,
   When I make a change in text, the font reverts to the previously used font

   •  

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Crash on new artboard

   Every time I click on the "+" under my artboards window, it crashes. I have 24 artboards already, and if I duplicate one using Option click drag, it seems ok. But New Artboard crashes again and again.

   MacOS 15.5
   Illustrator 29.5.1

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Need More Info  ·  8 comments  ·  Documents and Artboards  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. メニュー表示がおかしい

   ファイル(府)と表示される

   •  

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   6 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

   As reported, this problem happens most probably due the the recent May update for Windows. At the moment removing it seems like the best soultion to solve the problem.

8. Contextual Task Bar and Help Bar don’t have hotkeys and these can’t be assigned

   When I check Keyboard Shortcuts, Menu Commands, Window, I can find Control, Properties... but not Contextual Task Bar or Help Bar. So we can’t assign hotkeys for these and call these from keyboard when needed.
   Seems like someone forgot to include these slots for customization. Please expose these.

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Illustrator wrongly says texts were created in different version of Illustrator

   After the update, this message now appears, saying that my files were created in a different version. But it should be backwards compatible.

   •  

   3 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under Review  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

   The team intends to have this fixed

10. CMYK-Werte im Farbwähler werden nach „Ohne Farbe“ in RGB umgewandelt – trotz CMYK-Dokument

    Ich arbeite in einem Illustrator-Dokument im CMYK-Farbmodus. Wenn ich die Flächenfarbe eines Objekts auf „Ohne Farbe“ setze und danach über den Farbwähler neue CMYK-Werte eingebe, wandelt Illustrator diese automatisch in RGB-Farben um – obwohl das Dokument und die Farbeinstellungen vollständig auf CMYK eingestellt sind.
    Das Problem tritt seit Kurzem in allen neuen und bestehenden Dateien auf, auch nach Zurücksetzen der Voreinstellungen und Neuinstallation.
    Der Fehler lässt sich jederzeit reproduzieren:
    Neues CMYK-Dokument erstellen
    Objekt zeichnen, Fläche auf „Ohne Farbe“ setzen
    Über Farbwähler CMYK-Wert eingeben
    Illustrator wandelt die Eingabe in RGB um
    Das Verhalten widerspricht dem erwarteten Verhalten in einem CMYK-Dokument und wirkt wie ein anhaltender Bug.

    Betriebssystem: macOS Sequoia 15.4.1
    Illustrator-Version: 29.5.1
    Farbprofil: CMYK: Coated FOGRA39 (ISO 12647-2:2004)
    GPU/CPU-Vorschau getestet? Ja!

    Ich arbeite in einem Illustrator-Dokument im CMYK-Farbmodus. Wenn ich die Flächenfarbe eines Objekts auf „Ohne Farbe“ setze und danach über den Farbwähler neue CMYK-Werte eingebe, wandelt Illustrator diese automatisch in RGB-Farben um – obwohl das Dokument und die Farbeinstellungen vollständig auf CMYK eingestellt sind.
    Das Problem tritt seit Kurzem in allen neuen und bestehenden Dateien auf, auch nach Zurücksetzen der Voreinstellungen und Neuinstallation.
    Der Fehler lässt sich jederzeit reproduzieren:
    Neues CMYK-Dokument erstellen
    Objekt zeichnen, Fläche auf „Ohne Farbe“ setzen
    Über Farbwähler CMYK-Wert eingeben
    Illustrator wandelt die Eingabe in RGB um
    Das Verhalten widerspricht dem erwarteten Verhalten in einem CMYK-Dokument und… more

    •  

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Colors, Swatches, Patterns  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Recolor doesn’t allow to change white or black with a first try

    I use the Recolor (color mixer / wheel) daily. I have come across an annoying bug.

    Some base colors will be automatically 'locked' in the color mixer, indicated by a '-'. For example, let's say I'm trying to turn white into red.
    - First, white needs to be unlocked. By clicking the '-', it will become an arrow '->', and the swatch should be toggle-able now.
    - The first time you toggle the white, it selects, sliders can be moved to make it red, but it doesn't stay adjusted; it reverts back to whites.
    - You need to click another random swatch, then go back to the white swatch which now accepts being toggled to red.

    I use the Recolor (color mixer / wheel) daily. I have come across an annoying bug.

    Some base colors will be automatically 'locked' in the color mixer, indicated by a '-'. For example, let's say I'm trying to turn white into red.
    - First, white needs to be unlocked. By clicking the '-', it will become an arrow '->', and the swatch should be toggle-able now.
    - The first time you toggle the white, it selects, sliders can be moved to make it red, but it doesn't stay adjusted; it reverts back to whites.
    - You need to click another… more

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Colors, Swatches, Patterns  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. Bottom margins for labels are too small for Swatch Info objects in the column view (with no card backgrounds)

    If I choose to display Swatch Info card in a column, and choose to omit background cards, the result would have text lines too close to the chips below, like the attached image shows. It makes it feel like the text is not related to chips above, and forces us to use cards still to control 'space after' at least somehow, even when cards are not necessary.

    While the team hardcoded the 'space before' as a strict gap (again, hardly OK), they seem to forget to do the same for the bottom line.

    And if you pick this up, please don’t forget about this request as well:
    Allow to place cards next to color chips instead of always below for Swatch Info objects
    http://illustrator.uservoice.com/forums/333657/suggestions/49723799

    If I choose to display Swatch Info card in a column, and choose to omit background cards, the result would have text lines too close to the chips below, like the attached image shows. It makes it feel like the text is not related to chips above, and forces us to use cards still to control 'space after' at least somehow, even when cards are not necessary.

    While the team hardcoded the 'space before' as a strict gap (again, hardly OK), they seem to forget to do the same for the bottom line.

    And if you pick this up, please… more

    •  

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Colors, Swatches, Patterns  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. More than 32,000 anchor points can be added to a single path

    The pathPoint limit is 32,000, and if we try to continue drawing a path from the end of a PathItem with the pen tool, a dialog box will appear and refuse to add anchor points, but we can add anchor points to the segments in between.

    macOS 14.7.2
    Illustrator ver. 29.3.1

    Step to reproduce
    1. Create a path object in a new document.
    2. Add 32,000 anchor points to the path object.
    3. Click on any segment with the pen tool. We can add anchor points even if the number of anchor points exceeds 32000 (the number of segments exceeds 31999).

    Expected result
    For the 32001st anchor point added, a dialog appears and refuses to add the anchor point, just as it does for a end of pth object.

    Actual result
    More than 32001 anchor points can be added to a path object.

    JP Translated:
    パスポイントの制限は32000個でペンツールで線端から引き続きパスを描こうとするとダイアログが表示されてアンカーポイントの追加を拒否されるが、間のセグメントに対してはアンカーポイントを追加できる。

    再現手順
    1. 新規ドキュメントにパスオブジェクトを一つ作成する。
    2.そのオブジェクトに32000個のアンカーポイントを付加する。
    3.任意のセグメントにペンツールでクリックする。アンカーポイントが32000個を超える（セグメントが31999を超える）がアンカーポイントを追加できてしまう。

    期待する結果
    32001個目のアンカーポイント追加に対しては線端に対する処理同様にダイアログが表示されてアンカーポイントの追加が拒否される。

    実際の結果
    32001個以上のアンカーポイントを一つのパスオブジェクトに追加できてしまう。

    The pathPoint limit is 32,000, and if we try to continue drawing a path from the end of a PathItem with the pen tool, a dialog box will appear and refuse to add anchor points, but we can add anchor points to the segments in between.

    macOS 14.7.2
    Illustrator ver. 29.3.1

    Step to reproduce
    1. Create a path object in a new document.
    2. Add 32,000 anchor points to the path object.
    3. Click on any segment with the pen tool. We can add anchor points even if the number of anchor points exceeds 32000 (the number of segments exceeds… more

    • 

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Strokes  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. このフォルダー内の見つからないリンクを検索機能が消えた

    このフォルダー内の見つからないリンクを検索機能
    バージョン28.5であることを確認したが、バージョン29.3.1ではその機能が消えてしまい、チェックボックスが出てこない

    •  

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Images, Links  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  AdminEgor Chistyakov (Admin, Adobe Illustrator) responded

    The team had to retract this feature to re-evaluate the integration with other link-related features. There is no estimated time on this making its way back yet.

15. Please allow files to reopen after crash/restart/reopen

    Please please Adobe - why is it almost every other company has managed to give us the option to reopen after quit with the same files open but you still haven't?? Today Creative Cloud told me I had 7 updates available and I thought, ok great, maybe just maybe the illustrator one fixes my snap to point problem. So I had to take a photo of what docs I had open (!), quit Illustrator and go back to Creative Cloud to do the update... only to find that it had changed its mind and I only had two updates but low and behold the icon had now updated. And no, neither of them were for Illustrator anymore so back I go.

    Nice icon... but really Adobe?! Please make my very expensive software work first!!

    Also, is it just me or are adobe cloud files crazily slow to load even on quite a quick connection?

    Please please Adobe - why is it almost every other company has managed to give us the option to reopen after quit with the same files open but you still haven't?? Today Creative Cloud told me I had 7 updates available and I thought, ok great, maybe just maybe the illustrator one fixes my snap to point problem. So I had to take a photo of what docs I had open (!), quit Illustrator and go back to Creative Cloud to do the update... only to find that it had changed its mind and I only had two updates but… more

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Documents and Artboards  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. 異体字を指定したグリフに対してSVGフィルタを適用するとデフォルトのグリフにフォールバックする

    macOS 14.7.2 iMac27inch
    Illustrator ver.29.3.1

    再現手順
    1. ポイントテキストをドキュメント上に作成し「ABCD」と入力し、各グリフを異体字（添付のサンプルではu+0041 nalt5等を指定）に変更する。
    2.作成したテキストに任意のSVGフィルタを適用する。
    3.異体字を指定したグリフがデフォルトのグリフにフォールバックした状態でレンダリングされる。

    期待する結果
    指定した異体字のままSVGフィルタが適用される。

    実際の結果
    異体字はデフォルトのグリフに変更された状態でレンダリングされる。

    EN Translated:
    Step to Reproduce
    1. create a point text on the document, type "ABCD" and change each glyph to a alternate glyph (in the attached sample, specify u+0041 nalt5, etc.).
    2. Apply any SVG filter to the created text.
    3. The alterrnate glyphs are rendered with fallback to the default glyphs.

    Expected result
    The SVG filter will be applied with the alternate glyphs.

    Actual result
    The alternate glyphs are rendered with the glyphs changed to the default glyphs.

    • 

    •  

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Under Review  ·  2 comments  ·  Effects, Appearance, Graphic Styles  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. テキストに適用したSVGフィルタがテキストのトラッキングに追随しない

    SVG filter applied to text does not follow text tracking

    macOS 14.7.2 iMac27inch
    Illustrator ver.29.3.1

    Step to Reproduce
    1. ポイントテキストをドキュメント上に作成し、任意のテキストを入力する。
    2.作成したテキストに任意のSVGフィルタを適用する。
    3.テキストのトラッキングを適当に入力するかoption+→で文字感覚を操作する。
    4.テキストハイライトは変化するが、フィルタープレビューは変化しない。
    5.また、あらかじめトラッキングを適用した文字列にSVGフィルタを適用するとトラッキングが解除された状態でSVGフィルタが適用される。

    期待する結果
    ver.28のようにSVGフィルタを適用してもトラッキングが機能する。

    実際の結果
    トラッキングを行ってもSVGフィルタのレンダリングが変化しない。

    EN Translated:
    Step to Reproduce
    1. Create a point text on the document and enter any text.
    2. Apply any SVG filter to the created text.
    3. Enter text tracking as desired or use Option+ARROW to manipulate the text tracking.
    4. The text highlight will change, but the filter preview will not.
    5. Also, if you apply an SVG filter to a text with tracking applied beforehand, the SVG filter will be applied with the tracking removed.

    Expected results
    Tracking works when SVG filter is applied as in ver.28.

    Actual result
    Tracking does not change the rendering of the SVG filter.

    ※添付のファイルはIllustrator形式のファイルに.pdfの拡張子を付加したものです。.pdfを削除してからIllustratorで開いてください。

    SVG filter applied to text does not follow text tracking

    macOS 14.7.2 iMac27inch
    Illustrator ver.29.3.1

    Step to Reproduce
    1. ポイントテキストをドキュメント上に作成し、任意のテキストを入力する。
    2.作成したテキストに任意のSVGフィルタを適用する。
    3.テキストのトラッキングを適当に入力するかoption+→で文字感覚を操作する。
    4.テキストハイライトは変化するが、フィルタープレビューは変化しない。
    5.また、あらかじめトラッキングを適用した文字列にSVGフィルタを適用するとトラッキングが解除された状態でSVGフィルタが適用される。

    期待する結果
    ver.28のようにSVGフィルタを適用してもトラッキングが機能する。

    実際の結果
    トラッキングを行ってもSVGフィルタのレンダリングが変化しない。

    EN Translated:
    Step to Reproduce
    1. Create a point text on the document and enter any text.
    2. Apply any SVG filter to the created text.
    3. Enter text tracking as desired or use Option+ARROW to manipulate the text tracking.
    4. The text highlight will change, but the filter preview will not.
    5. Also, if you apply an SVG filter to a text with tracking applied beforehand, the SVG filter will be… more

    • 

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Effects, Appearance, Graphic Styles  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. Upside down text stroke disappears when exporting

    When I go to export files in illustrator any upside down font with a stroke that has not been outlined shows up in the jpeg without the stroke.

    •  

    •  

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Auto Spell Check is splitting words causing false highlights.

    The false highlights are making editing a typo impossible. See attached example.

    MacOS 15.3.1
    Illustrator 29.3

    •  

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    5 comments  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. フォントの検索と置換パネルで表示用に埋め込まれたフォントをアクティベート出来ない

    macOS14.7.2/27inch iMac/i5/32GB/1TB
    Illustrator ver.29.3

    再現手順
    1.新規ドキュメントを開き任意のテキストを入力しフォント（AdobeFontsより導入したもの）を指定する。
    2.「ファイルプレビュー用に許可されたフォントを埋め込む」チェックボックスをONにして保存して閉じる。
    3.指定したフォントをアンインストールする。
    4.先のドキュメントをIllustratorで開く。
    5.最初に表示される「環境に無いフォント」のパネルを閉じる。
    6.メニュー「書式→フォントの検索と置換...」を選択肢「フォントの検索と置換」パネルを開く。
    7.表示用に埋め込まれたフォントは追加のチェックボックスがグレーアウトしてチェックできない。

    期待する結果
    表示用に埋め込まれたフォントであってもフォントの検索と置換パネル上でAdobeFontsからアクティベートできる。

    実際の結果
    表示用に埋め込まれたフォントが検索と置換パネル上でAdobeFontsからアクティベートできない。

    ※表示用に埋め込まれたフォントであるということを明示的に表示するべきかもしれません。

    Translated:
    Step to Reproduce
    1. Open a new document, type in any text and specify a font (activated from Adobe Fonts).
    2. Check the "Embed permitted fonts for file preview" checkbox, save and close the file.
    3. Uninstall the specified fonts.
    4. Open the previous document in Illustrator.
    5. Close the "Missing Fonts" dialog that appears first.
    6. Select the menu item "Type > Find/Replace Fonts...".
    7. The additional checkboxes for fonts embedded for display are grayed out and cannot be checked.

    Expected Result
    Even fonts embedded for display can be activated from Adobe Fonts in the Find and Replace Fonts panel.

    Actual Result
    Embedded fonts for display cannot be activated from Adobe Fonts on the Find and Replace Fonts panel.

    *Probably, should explicitly indicate that the font is embedded for display purposes.

    macOS14.7.2/27inch iMac/i5/32GB/1TB
    Illustrator ver.29.3

    再現手順
    1.新規ドキュメントを開き任意のテキストを入力しフォント（AdobeFontsより導入したもの）を指定する。
    2.「ファイルプレビュー用に許可されたフォントを埋め込む」チェックボックスをONにして保存して閉じる。
    3.指定したフォントをアンインストールする。
    4.先のドキュメントをIllustratorで開く。
    5.最初に表示される「環境に無いフォント」のパネルを閉じる。
    6.メニュー「書式→フォントの検索と置換...」を選択肢「フォントの検索と置換」パネルを開く。
    7.表示用に埋め込まれたフォントは追加のチェックボックスがグレーアウトしてチェックできない。

    期待する結果
    表示用に埋め込まれたフォントであってもフォントの検索と置換パネル上でAdobeFontsからアクティベートできる。

    実際の結果
    表示用に埋め込まれたフォントが検索と置換パネル上でAdobeFontsからアクティベートできない。

    ※表示用に埋め込まれたフォントであるということを明示的に表示するべきかもしれません。

    Translated:
    Step to Reproduce
    1. Open a new document, type in any text and specify a font (activated from Adobe Fonts).
    2. Check the "Embed permitted fonts for file preview" checkbox, save and close the file.
    3. Uninstall the specified fonts.
    4. Open the previous document in Illustrator.
    5. Close the "Missing Fonts" dialog that appears first.
    6. Select the menu item "Type > Find/Replace Fonts...".
    7. The additional checkboxes for fonts embedded for display are grayed out and cannot be checked.

    Expected… more

    3 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Under Review  ·  1 comment  ·  User Interface  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating