8260 results found

1. Radial gradient Annotator's centre point not aligned to object centres

   Windows 10, all updated.
   Illustrator 30.3 64-bit

   ---

   The end point of the 'Gradient Annotator' marking the centre of a radial gradient should, I think, be placed on the centre of an object. But there is a rather big offset (image 'gradient-align.png'), which makes it tricky to position the gradient to, for instance, the bottom of an object.
   The centre is not really the centre but is rather to the right of the centre point. It is weird.

   Ideally, it would be at the centre so the 'Gradient Annotator' could be perfectly placed at the centre if the bar was moved down ('gradient-moved.png').

   Windows 10, all updated.
   Illustrator 30.3 64-bit

   ---

   The end point of the 'Gradient Annotator' marking the centre of a radial gradient should, I think, be placed on the centre of an object. But there is a rather big offset (image 'gradient-align.png'), which makes it tricky to position the gradient to, for instance, the bottom of an object.
   The centre is not really the centre but is rather to the right of the centre point. It is weird.

   Ideally, it would be at the centre so the 'Gradient Annotator' could be perfectly placed at the centre if the bar was moved… more

   •  

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   2 comments  ·  Gradients  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Swatch Panel is not adjustable

   Since the new update, the Swatch panel cannot be adjusted and so I cannot have all of my panels open at the same time now. If I expand the color panel, I have to sacrifice another panel to be shrunk. I used to be able to take away the empty space under the swatch area which gave more room for the other panels to be open.

   Win 11 and current vs of AI.

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Need More Info  ·  1 comment  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. Eyedropper - Alt Clicking Text to Text Doesn't Apply Stylings

   Windows 10 Pro 22H2 19045.6456
   Illustrator 30.4 (64-bit)

   When text object 1 is selected, using the Eyedropper tool and holding Alt to left click onto text object 2 (to apply the font style color paragraph style etc.), doesn't apply the stylings of text object 1 at all.

   It does 1 of 2 things I found:
   1) it's applying the text stylings of whatever current text settings are visible from the Character panel plus it will also apply no fill/stroke color to the text.
   2) it will literally do nothing and no change happens, no matter how much you spam alt left click onto text object 2.

   I've opened new .ai files to test and it keeps happening.

   Yes I've checked eyedropper settings and all the boxes are enabled.

   Windows 10 Pro 22H2 19045.6456
   Illustrator 30.4 (64-bit)

   When text object 1 is selected, using the Eyedropper tool and holding Alt to left click onto text object 2 (to apply the font style color paragraph style etc.), doesn't apply the stylings of text object 1 at all.

   It does 1 of 2 things I found:
   1) it's applying the text stylings of whatever current text settings are visible from the Character panel plus it will also apply no fill/stroke color to the text.
   2) it will literally do nothing and no change happens, no matter how much you spam alt… more

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Tools  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. DXF import size issue 2026 that works in 2024

   Opening DXF in latest version 2026 at original size or 1:1 does not work, results are close but not exact. Works fine in version 2024. However, if saved as a PDF from 2024 with accurate sizes, when opened in version 2026 the size is not accurate, a few thousands off. Have many files that were created using 2024 and if I need to make adjustments for any reason opening in 2026 will result in size issues.
   Windows 10 64 gb ram.

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Need More Info  ·  4 comments  ·  Documents and Artboards  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Rotating circle object stops visually showing at certain angles

   After a certain threshold, circle shaped objects seem to not want to visually show rotation using the corner tool. This only seems to be a problem on ellipses as all other shape types seem to not have the issue.

   The shapes still rotate, but they seem to not show after some random amount of rotation. Using ver 30.4. I know the screenshot sucks, but let me know if you need a video or anything else to help

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Need More Info  ·  1 comment  ·  Selection  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Artboard Names Not Showing

   A bulk of the artboards are showing the names, but several only show the number. Upon double clicking the artboard title, it appears only 1 character is visible at a time, but the artboard is indeed properly titled.

   Illustrator CC 30.3 on AppleM2 Pro Mac Mini.

   •  

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Documents and Artboards  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Version 30.3 Simulate Colored Paper causes white fill to render transparent and objects off the artboard dimmed

   Revert to how it was before the latest update — where white filled objects appear white on screen and objects on the pasteboard look normal when using "simulate colored paper"

   (this happened on macOS Tahoe 26.4.1)

   •  

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Rendering Issues (GPU, CPU)  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Palette Redéfinir les couleurs qui se ferme toute seule au moindre clic

   Bonjour. J'ai ce soucis depuis un moment.
   Lorsque j'ouvre la palette de modification de couleur ''Redéfinir les couleurs'' qui se trouve dans Edition/Modification des couleurs/Redéfinir les couleurs de l'illustration... dès lors que je clique sur les cercles pour les déplacer et changer la couleur, la palette disparaît. J'ai beau recommencer, dès que je touche les cercles, la palette se ferme. Impossible donc de changer les couleurs de l'illustration.
   La video en pièce jointe est très explicite.

   Si vous avez une solution, je suis preneur.

   Système MacOS 26.3.1 (a) (25D771280a) - iMac M3
   Illustrator v30.4

   Cordialement.

   • 

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Need More Info  ·  1 comment  ·  User Interface  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. No me deja editar el punto de ancla y no deja redondear los vectores

   Por este medio solicito que arregle eso o una solucion al problema

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   Need More Info  ·  1 comment  ·  Tools  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Severe selection lag on direct click (Marquee selection works fine) - Illustrator 30.3 - macOS Tahoe (M4)

    Hi everyone,

    I am experiencing a critical issue that is completely breaking my workflow in Adobe Illustrator, and I suspect it might be a specific bug in the latest version or a compatibility issue with the new hardware/OS.

    The Problem:
    Whenever I try to select any element by clicking directly on it, the program takes a long time to react, select the object, and display the bounding box (the resizing and rotation handles). This delay makes it impossible to work efficiently or even copy/paste quickly.

    The strange part is that if I select the object by dragging the cursor (marquee/area selection), the response is immediate and works perfectly. The lag only happens with a direct click on the object.

    My Suspicions:
    Given that my hardware is very powerful, I suspect the bottleneck is related to the rendering of the new rotation properties on the bounding box or the background calculations of the Generative AI Contextual Taskbar that trigger upon selection.

    My System Specs:

    Computer: Mac mini (2024)

    Chip: Apple M4

    Memory: 24 GB RAM

    OS: macOS Tahoe 26.4.1

    Illustrator Version: 30.3

    What I have already tried (without success):
    To save time, here is a list of everything I have already tested, and none of these solved the issue:

    Disabling GPU Performance.

    Disabling Smart Guides (Cmd + U).

    Hiding the Contextual Taskbar.

    Adjusting Selection Tolerance and disabling "Object Selection by Path Only".

    Closing the Properties Panel while working.

    Hiding the Bounding Box (Cmd + Shift + B).

    Resetting Illustrator Preferences to factory defaults.

    I am attaching a video where you can clearly see the difference between the slow selection (direct click) and the fast response (marquee selection).

    Is anyone else using an M4 chip or macOS Tahoe experiencing this selection bug? Any help or workaround would be greatly appreciated.

    Thank you!

    Hi everyone,

    I am experiencing a critical issue that is completely breaking my workflow in Adobe Illustrator, and I suspect it might be a specific bug in the latest version or a compatibility issue with the new hardware/OS.

    The Problem:
    Whenever I try to select any element by clicking directly on it, the program takes a long time to react, select the object, and display the bounding box (the resizing and rotation handles). This delay makes it impossible to work efficiently or even copy/paste quickly.

    The strange part is that if I select the object by dragging the cursor (marquee/area… more

    • 

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Selection  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Navigator is not navigating

    Illustrator 30.2.1. Macbook

    In the Navigator panel so I can see my artboard and all the items in it. But when my view is for example in the upper right corner, and I click on the lower left corner, because I want my view to pan over there, it only brings me a little bit more to the left. It seems like a big bug and the Navigator is now sort of useless. In previous Illustrator editions it was working perfectly.

    •  

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Need More Info  ·  5 comments  ·  User Interface  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. Illustrator 2026 Eyedropper Leaves Previous Fill Color Hidden in Nested Objects

    In Illustrator 2026, the Eyedropper tool sometimes applies the sampled appearance to the selected group/subgroup level instead of replacing the actual appearance of the underlying object.

    This creates a dangerous prepress issue: the object visually appears recolored, but the previous fill color remains inside the nested object structure. The old color does not appear as a separate duplicated object when ungrouping. It only becomes visible after entering isolation mode several levels deep. If that internal element/fill is deleted, the entire object disappears, which confirms it is not a duplicate object but the original object retaining its previous appearance.

    Expected behavior: the Eyedropper should copy and apply the selected appearance as it did in Illustrator 2025, replacing the object’s actual appearance without leaving the previous color hidden inside nested groups.

    Actual behavior: Illustrator 2026 sometimes stacks the new appearance above the object/group while preserving the previous internal fill, causing incorrect color separations and a high risk of production errors in packaging/prepress workflows.

    I'm a very experienced user. This started on Illustrator 2026. 2025-2024 were OK.

    In Illustrator 2026, the Eyedropper tool sometimes applies the sampled appearance to the selected group/subgroup level instead of replacing the actual appearance of the underlying object.

    This creates a dangerous prepress issue: the object visually appears recolored, but the previous fill color remains inside the nested object structure. The old color does not appear as a separate duplicated object when ungrouping. It only becomes visible after entering isolation mode several levels deep. If that internal element/fill is deleted, the entire object disappears, which confirms it is not a duplicate object but the original object retaining its previous appearance.

    Expected behavior:… more

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Need More Info  ·  7 comments  ·  Colors, Swatches, Patterns  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Cutting off bottom of page when printing

    Fix the problem of cutting off the bottom of the page when I print with Illustrator. I can save the document as a PDF and print it fine with preview, but Illustrator cuts off part of the bottom of the print. It has the incorrect print border. So stupid.

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Need More Info  ·  1 comment  ·  Print  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. No puedo abrir un archivo pesado guardado en Cloud

    El archivo no se descarga para poder abrirlo de manera local. Es un archivo pesado, con imágenes. Un banner para imprimir de gran porte.

    Al abrirse desde los archivos de cloud en el illustrator de escritorio, el archivo queda en formato esquema (contornear) y no permite previsualizar de ninguna manera, ni modificando el GPU ni en forma CPU.

    Cree una copia sacando lienzos y archivos y tampoco logro guardar el documento de manera local. Marca error pero no explica de dónde viene ni tira ningún número.

    Por favor, necesito ayuda.

    •  

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  File Save, Import and Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. Colour Guide - Set Base Colour doesn't recognise filled object, only with a stroke

    Version 30.3 Set base colour only recognises object that has a stroke colour. Will not recognise object with only a fill colour. When trying to fill an object with a colour from the colour guide, it will only colour the object with a stroke of the selected colour.

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Need More Info  ·  4 comments  ·  Colors, Swatches, Patterns  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. カラーフォントを指定したテキストのドロップシャドウが正しく表示されない

    macOS14.7.2
    ver.30.3.

    再現手順
    1. ドキュメント上にポイントテキストを追加し「TEST STRING」と入力。
    2. Trajan Color Conceptフォントを指定する。
    3. 効果→スタイライズ→ドロップシャドウを指定する。
    4. 効果部分がドロップシャドウだけでなく、半調になったテキストが含まれる。

    期待する結果
    ドロップシャドウのみがテキストに追加される。

    実際の結果
    カラーフォントを指定したテキストはドロップシャドウ部分に不透明度が低下した状態のテキストが含まれる。

    EN
    Steps to Reproduce
    1. Add point text to the document and type “TEST STRING”.
    2. Select the Trajan Color Concept font().
    3. Select Effect > Stylize > Drop Shadow.
    4. The effect includes not only the drop shadow but also the text rendered in halftones.

    Expected Result
    Only the drop shadow is applied to the text.

    Actual Result
    Text using a color font includes text rendered with reduced opacity in the drop shadow area.

    • 

    •  

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Effects, Appearance, Graphic Styles  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. No layer thumbnail for single element layers

    Issue: There's no layer thumbnail when dragging single elements to a new layer.

    This bug has been already mentioned and acknowledged, but has not been fixed, nor has had received any sort of update or follow up on its status. I believe it only affects v29.8.2 onwards.

    Here's a direct quote from the discussion describing the bug:

    "When dragging a graphic element to a new empty layer, there is no image preview in the layer square (row Size Medium Option in Layer Panel). When you add another element, a preview appears, but if you only have one element in a layer, you have to do extra steps to see the contents of the layer."

    https://community.adobe.com/questions-652/thumbnail-for-the-layers-panel-does-not-update-automatically-ai-29-8-2-817530

    For designers who rely on layer thumbnails for design work, the unreliable layer thumbnails makes immediate changes hard to see and track. It disrupts workflow.

    Issue: There's no layer thumbnail when dragging single elements to a new layer.

    This bug has been already mentioned and acknowledged, but has not been fixed, nor has had received any sort of update or follow up on its status. I believe it only affects v29.8.2 onwards.

    Here's a direct quote from the discussion describing the bug:

    "When dragging a graphic element to a new empty layer, there is no image preview in the layer square (row Size Medium Option in Layer Panel). When you add another element, a preview appears, but if you only have one element in a… more

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Layers  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. Layer thumbnails are not displaying properly (CPU Preview)

    Issue: Layer thumbnails are cropped based on previous zoom state.

    When you open a document that's been previously saved in a zoomed-in state, all visible layers' thumbnails will only show the elements that are visible in the zoom view. That is, elements that were out of view when the document was saved, are no longer visible in their layer thumbnail after reopening the document.

    How to reproduce

    1. Make sure "GPU Performance" is turned OFF in the preferences.

    2. Create or open a document that has many elements in it.

    3. Zoom into a particular area of the document, purposely cropping other parts of the document out of view.

    4. Save the document.

    5. Close and reopen the document.

    6. Notice how the layers' thumbnails only display the elements that were in view.

    Another possibly related bug is when creating elements via scripting. Elements generated outside of the current view are immediately not visible in their layer's thumbnail.

    Some notes:

    • This only occurs when "GPU Performance" is explicitly switched OFF in the preferences (not by using CTRL+E or "View > View using CPU/GPU").

    • This only occurs for layers that are visible. Layers that had their visibility toggled off are not affected.

    • I believe the last version of Illustrator that did not have any of these problems was Illustrator 2024 (v28).

    If needed, I can provide more details and/or screen recordings of the bugs. Just let me know.

    Issue: Layer thumbnails are cropped based on previous zoom state.

    When you open a document that's been previously saved in a zoomed-in state, all visible layers' thumbnails will only show the elements that are visible in the zoom view. That is, elements that were out of view when the document was saved, are no longer visible in their layer thumbnail after reopening the document.

    How to reproduce

    1. Make sure "GPU Performance" is turned OFF in the preferences.

    2. Create or open a document that has many elements in it.

    3. Zoom into a particular area of the document, purposely cropping other parts… more

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Need More Info  ·  3 comments  ·  Layers  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Adobe Fonts が Illustrator で認識されず、作業が継続不能になる重大不具合

    Adobe Fonts に存在し、Creative Cloud でアクティベート済みのフォントが、
    Illustrator 内で表示されず使用できません。

    具体的には「VDLロゴJr（通常・ブラック）」が、
    ・Adobe Fonts ではアクティブ
    ・Figma では使用可能
    にもかかわらず、Illustrator のフォント一覧に一切表示されません。

    以下の対処をすべて実施しましたが改善しませんでした：
    - Adobe Fonts の再アクティベート
    - Illustrator のフォントキャッシュ削除（AdobeFnt*.lst）
    - Windows の FontCache.dat 削除
    - Illustrator の環境設定リセット
    - ローカルフォントの衝突確認
    - Figma Font Helper の停止

    それでも Illustrator だけがフォントを認識しません。

    仕事で使用しており、毎月料金を支払っているにも関わらず、
    基本的な「フォントが使える」という機能が保証されていない状態です。

    至急、原因の特定と修正をお願いします。

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Overset text indicators do not show when Type on Path has overflow

    Text Overflow / Overset (+) Indicators are not showing on newer illustrator versions on Text Paths (Point Text).
    The text paths have stopped showing the indicator when clicking off of the Text on a path (point type) has text overflow.

    As a map design company this is a big issue for us, as our files have thousands of text paths. We used to be able to identify crucial overset text information using these markers however they have vanished for the most past. Some files do occasionally show them but most do not. This is recently cause us to mistakenly print a files that have text overflowing with no indication.

    • View using GPU and CPU makes no difference.
    • It happens on old / new files when opened.
    • Applies to all fonts,
    • Some larger paths still show
    • Does not differ if I toggle View > Show/Hide Text Threads

    Text Overflow / Overset (+) Indicators are not showing on newer illustrator versions on Text Paths (Point Text).
    The text paths have stopped showing the indicator when clicking off of the Text on a path (point type) has text overflow.

    As a map design company this is a big issue for us, as our files have thousands of text paths. We used to be able to identify crucial overset text information using these markers however they have vanished for the most past. Some files do occasionally show them but most do not. This is recently cause us to mistakenly print… more

    •  

    •  

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Need More Info  ·  1 comment  ·  Type, Fonts, Text  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating